WWTP Upgrades and Sanitary Sewer Collection System Improvements

The approximate quantities of work to be bid upon are described as follows: 1 LS Mobilization/Demobilization, 1 LS Portable Generator, 1 LS Erosion and Sediment Controls, 4 EA Type B Manhole Rehabilitation (0 to 6'), 16 VF Type B Manhole Rehabilitation (Greater than 6'), 1 EA Type D Manhole Rehabilitation,1,600 LF Restoration of Disturbed Area, 110 LF Concrete Roadway/Driveway Repair, 900 LF WVDOH Type "B" Trench Repair, 110 LF WVDOH Type "C" Trench Repair, 220 LF Full Width Roadway Crushed Stone Repair, 5,000 LF Videotape Existing 8" Sanitary Sewer Line, 330 LF Videotape Existing 8" Storm Sewer, 220 LF Videotape Existing 24" Storm Sewer, 5,000 LF Clean Existing 8" Sanitary Sewer Line, 330 LF Clean Existing 8" Storm Sewer, 220 LF Clean Existing 24" Storm Sewer, 2,100 LF Remove Existing Service Lateral and Replace with New 4" ASTM D3034 SDR 35 PVC Gravity Sanitary Sewer Lateral (0 - 6' Depth), 140 LF Remove Existing Gravity Sewer Line and Replace with New 8" ASTM D3034 SDR 35 PVC Gravity Sanitary Sewer (0 - 6' Depth), 500 LF Remove Existing Gravity Sewer Line and Replace with New 8" ASTM D3034 SDR 35 PVC Gravity Sanitary Sewer (0 - 6' Depth) at Locations Identified in Cleaning and Videoing by Contractor, 1 LS Upgrades to the Kwik Stop Grinder Station, 1 LS Upgrades to the East End Grinder Station, 1 LS Upgrades to the WVDOH Grinder Station, 1 LS Wastewater Treatment Plant Upgrades, 64 EA Lateral Connection at Wye/Bend and/or Customer Side, 32 EA Lateral Cleanout, 1 EA Remove Utility Pole and Place Along Right-of-Way, 8 EA Connection to Existing 8" PVC Sewer Line, 2 EA Remove Drain Inlet Lid for Inspection, 10 EA Cut and Cap Unused Lateral, 4 EA Cap Cleanout, 110 LF Concrete Sidewalk Repair, 12 EA Test Pit to Locate Existing Lateral, ALLOWANCE for Correcting Drain Inlets to Remove Inflow.

Sewage Treatment Plant, New Construction.

Division 02 -	Existing Conditions, Subsurface Investigation.
Division 03 -	Concrete, Precast Concrete.
Division 04 -	Masonry, Unit Masonry.
Division 05 -	Metals, Structural Metal Framing, Metal Fabrications.
Division 06 -	Wood, Plastics, and Composites, Rough Carpentry.
Division 07 -	Thermal and Moisture Protection, Dampproofing and Waterproofing, Thermal Protection.
Division 08 -	Openings, Doors and Frames, Windows, Hardware.
Division 09 -	Finishes, Painting and Coating.
Division 10 -	Specialties, Signage, Compartments and Cubicles, Emergency Aid Specialties, Fire Protection Specialties, Storage Assemblies.
Division 11 -	Equipment, Laboratory Equipment.
Division 14 -	Conveying Equipment.
Division 21 -	Fire Suppression, Fire-Extinguishing Systems.
Division 22 -	Plumbing, Instrumentation and Control for Plumbing, Plumbing Piping, Plumbing Equipment, Plumbing Fixtures.
Division 23 -	Heating, Ventilating, and Air Conditioning (HVAC), Instrumentation and Control for HVAC, HVAC Air Distribution.
Division 26 -	Electrical, Instrumentation and Control for Electrical Systems, Interior Lighting, Emergency Lighting, Exit Signs, Exterior Lighting.
Division 27 -	Communications, Structured Cabling, Data Communications, Voice Communications, Distributed Audio-Video Communications Systems.
Division 28 -	Electronic Safety and Security, Electronic Access Control and Intrusion Detection, Access Control, Intrusion Detection, Electronic Surveillance, Electronic Detection and Alarm.
Division 31 -	Earthwork, Earthwork Methods.
Division 32 -	Exterior Improvements, Flexible Paving, Rigid Paving, Curbs, Gutters, Sidewalks, and Driveways, Fences and Gates, Turf and Grasses.
Division 33 -	Utilities, Water Utilities, Sanitary Sewerage Utilities, Sanitary Utility Sewerage Piping, Sanitary Utility Sewerage Force Mains, Sanitary Utility Sewerage Structures, Storm Drainage Utilities, Electrical Utilities, Communications Utilities.
Division 44 -	Pollution and Waste Control Equipment, Common Work Results for Pollution and Waste Control Equipment, Air Pollution Control, Noise Pollution Control, Odor Control, Water Pollution Control Equipment, Solid Waste Control and Reuse, Waste Thermal Processing Equipment, Fluidized Bed Combustion Equipment, Rotary Kiln Incinerators, Pyrolysis Equipment, Hazardous Waste and Medical Waste Incinerators, Heat Recovery Equipment for Waste Thermal Processing, Synthesis Gas Cleanup and Handling Equipment.