Seal Coat

Bullfrog Road (T-321) Starting at SR 116 (Fairfield Road) to the township line. Approximate dimensions: 20 feet wide by 3700 feet in length. Placement of Asphalt Seal coating as per PennDOT Pub. 408 Section 470. Use RS-2PM CRS-2PM for tack coat. Type A, No. 8, or on roadways with less than 1,000 ADT No. 89, Section 703.2 or a gradation listed in Table A (Pub 408) and with the SRL designated in the Contract Item. Supply aggregate from a source listed in Bulletin 14. The Contractor may use an aggregate or blends of aggregates with an SRL equal to or better than that specified. Blends are 50% by weight of the two aggregates. Mix the aggregates using an approved method. Flagging to be provided by municipality. All work to be done at the direction of Road master. E-Verify required and all work to be completed by August 15, 2021.

Division 01 -	General Requirements, Vehicular Access and Parking, Traffic Control, Temporary Barriers and Enclosures.
Division 32 -	Exterior Improvements, Flexible Paving, Asphalt Paving, Seal Coats, Rigid Paving, Concrete Paving, Paving Specialties, Pavement Markings.
Division 33 -	Utilities, Storm Drainage Utilities, Storm Drainage Structures.