Compressor and Fill Station

New integrated compressor and fill station. The fill station must include a totally encapsulated system for filling SCBA bottles to include an interlock system that prevents refilling cylinders unless the fill station door is closed and secured in the closed position. The system must have the ability to fill a minimum of 2 bottles simultaneously. The ability to fill 3 bottles or more is preferred. The system must have an On-Off control with the ability to automatically start and stop the compressor motor to maintain the system’s operating pressure between high and low set points of the final pressure switch. The discharge line of the final stage of compression should have a temperature switch that automatically shuts down the system when it detects that the final stage discharge temperature has exceeded the tamperproof set point.

Fire/Police Station, Renovation.

Division 02 -	Existing Conditions, Demolition, Selective Demolition, Selective Interior Demolition.
Division 06 -	Wood, Plastics, and Composites, Rough Carpentry, Finish Carpentry.
Division 07 -	Thermal and Moisture Protection, Dampproofing and Waterproofing, Thermal Protection.
Division 08 -	Openings, Doors and Frames, Windows.
Division 09 -	Finishes, Plaster and Gypsum Board, Ceilings, Flooring, Painting and Coating.
Division 21 -	Fire Suppression.
Division 22 -	Plumbing.
Division 23 -	Heating, Ventilating, and Air Conditioning (HVAC), Instrumentation and Control for HVAC, HVAC Air Distribution, Refrigerant Compressors.
Division 26 -	Electrical, Lighting.