Hubert Water Treatment Plant Lagoon Cleaning

Hubert Water Treatment Plant Lagoon Cleaning The successful Contractor shall furnish and provide all permits, materials, equipment and labor necessary to dredge, dewater, transport, and properly dispose of non-biological accumulated solids and algae contained in the primary lagoon at the Hubert WTP. The work shall be performed in accordance with all local, state, and federal requirements. The Contractor shall obtain all necessary permits and shall monitor and perform required regulatory agency reporting associated with the disposal of the dredged material. The selected Contractor will be required to furnish a performance and payment bond for 100% of the project cost within ten (10) days after the contract has been activated and a Notice of Award has been issued by ONWASA. The project amount will be the total amount of the lowest responsive, responsible proposal accepted by ONWASA. The performance and payment bond shall continue throughout the project purchase order execution period of performance and for one year after the full scope of work is completed. NC Certified HUB Contractors are encouraged to submit bids for all bidding opportunities at ONWASA. Question Deadline 09/24/2023 Questions must be submitted in writing, at least two (2) business days before the submittal due date for this Proposal. Any interpretation or correction of the documents will be made only by an Addendum duly issued by ONWASA, and a copy of such Addendum will be posted on the ONWASA website. ONWASA reserves the right to accept or reject any or all proposals if it may deem it best for the public good, and to waive any informality in the proposals received.

Division 02 -	Existing Conditions, Subsurface Investigation.
Division 03 -	Concrete, Precast Concrete.
Division 04 -	Masonry, Unit Masonry.
Division 05 -	Metals, Structural Metal Framing, Metal Fabrications.
Division 06 -	Wood, Plastics, and Composites, Rough Carpentry.
Division 07 -	Thermal and Moisture Protection, Dampproofing and Waterproofing, Thermal Protection.
Division 08 -	Openings, Doors and Frames, Windows, Hardware.
Division 09 -	Finishes, Painting and Coating.
Division 10 -	Specialties, Signage, Compartments and Cubicles, Emergency Aid Specialties, Fire Protection Specialties, Storage Assemblies.
Division 11 -	Equipment, Laboratory Equipment.
Division 14 -	Conveying Equipment.
Division 21 -	Fire Suppression, Fire-Extinguishing Systems.
Division 22 -	Plumbing, Instrumentation and Control for Plumbing, Plumbing Piping, Plumbing Equipment, Plumbing Fixtures.
Division 23 -	Heating, Ventilating, and Air Conditioning (HVAC), Instrumentation and Control for HVAC, HVAC Air Distribution.
Division 26 -	Electrical, Instrumentation and Control for Electrical Systems, Interior Lighting, Emergency Lighting, Exit Signs, Exterior Lighting.
Division 27 -	Communications, Structured Cabling, Data Communications, Voice Communications, Distributed Audio-Video Communications Systems.
Division 28 -	Electronic Safety and Security, Electronic Access Control and Intrusion Detection, Access Control, Intrusion Detection, Electronic Surveillance, Electronic Detection and Alarm.
Division 31 -	Earthwork, Earthwork Methods.
Division 32 -	Exterior Improvements, Flexible Paving, Rigid Paving, Curbs, Gutters, Sidewalks, and Driveways, Fences and Gates, Turf and Grasses.
Division 33 -	Utilities, Water Utilities, Storm Drainage Utilities, Electrical Utilities, Communications Utilities.
Division 44 -	Pollution and Waste Control Equipment, Common Work Results for Pollution and Waste Control Equipment, Air Pollution Control, Noise Pollution Control, Odor Control, Water Pollution Control Equipment, Solid Waste Control and Reuse, Waste Thermal Processing Equipment, Fluidized Bed Combustion Equipment, Rotary Kiln Incinerators, Pyrolysis Equipment, Hazardous Waste and Medical Waste Incinerators, Heat Recovery Equipment for Waste Thermal Processing, Synthesis Gas Cleanup and Handling Equipment.