GulfQuest Maritime Museum - Skylight Film Replacement

Include all labor, materials, tools and equipment necessary to safely remove and replace the film on the topside of the skylight. The existing film (Johnson DN20EXT) shall be carefully removed so as not to scratch or damage the glass - without standing or leaning on the existing structure. It is the contractor's responsibility to install scaffolding or other structure / device which will allow the film to be removed and new film installed without putting any weight on the glass or the skylight structure. Once the existing film has been removed, the glass shall be cleaned with products approved by the manufacturer - ensuring that all of the film has been removed, including dirt,debris and any other type of residue. Prepare the glass and gaskets as per manufacturer's instructions. Protect gaskets, sealants and mullions. The contractor will then provide and install the new film (Johnson DN20EXT or pre-approved equal) to all glass surfaces on the topside of the skylight. Note that pre-quote approval for film substitution is required. The film shall be carefully installed over the entire glass surface, without any pinholes, thinspots, scratches, banding, tears, seams or bubbles. The edges shall be cut so that the film covers 100% of the exposed glass surface. The contractor shall be resposible for taking field measurements of the skylight panels and not rely on the accuracy of the attached drawings.

Division 07 -	Thermal and Moisture Protection, Dampproofing and Waterproofing, Thermal Protection.
Division 08 -	Openings, Doors and Frames, Windows.