Similar Projects
| Reported | 04/06/2019 12:00 AM |
| Project Title | Latrine Stall Partitions |
| Physical Address | View project details and contacts |
| City, State (County) | Trenton, NJ 08640 (Mercer County) |
| Category(s) | Single Trades |
| Sub-Category(s) | Service/Term Contracts |
| Contracting Method | Competitive Bids. |
| Project Status | Accepting Letters of Interest |
| Bids Due | View project details and contacts |
| Estimated Value | |
| Plans Available from | Federal Agency |
| Owner | View project details and contacts |
| Architect | View project details and contacts |
| Description | The stall partitions shall be fabricated from solid phenolic material (color throughout) in a color as close to Army Tan as possible. The partitions shall include the ability for floor mounting and also head rail bracing. This is necessary due to the design of the latrines in which they will be installed. The partitions shall be fabricated so that they can be installed on 32 inch center-to center distances. In addition, the design will be compatible with the building layout with a solid wall at both ends of the toilet area. Purpose: The partitions shall be installed around the three (3) toilets (ea.) in the men's and women's side of the four (4) rebuilt latrines for a total of twenty-four (24) stalls. All mounting hardware (hinges, handles, mounting hardware) shall be included. The floor mounted and head rail braced design shall include 80 inch pilasters that will go from the floor to a head rail that is located at least 12 inches above the doors and panels. A head rail is required for added strength and rigidity. | ||
| Details |
|
||
| Bidder's List | View project details and contacts | ||
| Prospective Bidders | View project details and contacts | ||
| Project Documents |
 Engineered Spec Sheet  Architectural Plans  Other Documents |
