Fuel System Dispenser Replacement

Contractor is required to lockout/tagout all valves, electrical connections, and safety interlocks before removing existing fuel hose reel. B.Contractor will remove existing digital hose reel at the Fuel dispensing terminal connection, and apply spill prevention/collection pads at all terminated fuel piping junctions. C.Contractor will design and install a compatible analog fueling system with hose reel that is compatible with Sector Mobile’s digital controlled fueling station. Analog fueling system will consist of the following requirements: (A) All piping will be constructed of stainless steel 304/316 or aluminum. All electrical/communication wiring will be housed in schedule 80 conduit. (B)12”-14” s/s or aluminum containment pan for over spray/leaks. (C) 1.5” stainless steel hose reel with automated/power rewind with a minimum of 120’ of 1.5” hose capacity. (D) 20-CG-DP14 hot gas equalizing headers and valves with 70+ gallon capacity. (E) Liquid controlled M5 Class 1 meter, mechanical V-R register dual element filter, 2” solenoid valve. (F) Powdered coated/ corrosion resistant frame and top cover, installed using 304 stainless steel hardware and nylon locking nuts. E.Contractor will install designed analog fuel system and test for leaks and pressure rating with Coast Guard approval. F.If required items on line 6.1.E are acceptable for reuse then contractor shall reuse all existing required items with Coast Guard’s approval.

Division 02 -	Existing Conditions, Subsurface Investigation.
Division 03 -	Concrete, Concrete Reinforcing, Cast-in-Place Concrete.
Division 05 -	Metals, Structural Metal Framing, Metal Decking.
Division 23 -	Heating, Ventilating, and Air Conditioning (HVAC), Facility Fuel Piping, Facility Fuel-Storage Tanks.
Division 31 -	Earthwork, Clearing and Grubbing, Grading.
Division 32 -	Exterior Improvements, Fences and Gates.
Division 33 -	Utilities, Storm Drainage Utilities.