Peaks Ice Arena Indoor Turf Replacement

To remove the current beaded infill turf field and replace it with a new field that does not have rubber beaded infill. The project would include the removal of the current field, disposal of the field, and install of the new field. The field would need lines for full field soccer, as well as, half field soccer and other multipurpose lines and a multi-color center logo. The field is approximately 69 yds x 32 yds (209’ x 97’). Turf specific requirements: Pile height between 25-35mm. Gmax rating under 100 or minimum foam backing of 5mm. This project shall include but not be limited to the following elements: 1. Removal of the current beaded infill turf field 2. Disposal of the current beaded infill turf field 3. Preparing concrete for new synthetic turf 4. Shipping and bringing in the new field materials 5. Installation of the new field 6. Sourcing logo and lines for field

Division 11 -	Equipment.
Division 31 -	Earthwork, Selective Clearing, Grading.
Division 32 -	Exterior Improvements, Athletic and Recreational Surfacing, Site Improvements, Fences and Gates, Planting.
Division 33 -	Utilities.