ADAL Explosive Ordinance Disposal (EOD) Facility

Contract No - W9128F-19-D-0002 The project will be constructed near flight line facilities at Ellsworth Air Force Base, South Dakota. Construct 458 SM (4,931 SF) Explosive Ordinance Disposal Facility to accommodate vehicle storage and equipment storage. Functional areas include storage of special purpose clothing and equipment, storage for mobility equipment, a heated garage for emergency vehicles, and storage for classified materials. The foundation system for the facility should be shallow foundations with over ADAL Explosive Ordinance Disposal Facility, Ellsworth AFB, SD excavation of the soil under the building footprint and replacing that soil with compacted fill. The structure of the facility will consist of steel framing and masonry walls. The lateral load resisting system is anticipated to be ordinary steel braced frame. The Contractor will be required to commence work within 10 days after Notice to Proceed (NTP) and complete the work in the number of calendar days (stated in the solicitation) after receipt of NTP. Clauses will be included for Liquidated Damages in case of failure to complete the work in the time allowed. Performance and Payment Bonds will be required. ***SITE VISIT WILL BE SEPTEMBER 21, 2023 at 10:00AM. The ADAL EOD EAL Attachment will need to be filled out and sent to the POC listed in the solicitation documents NLT SEPTEMBER 15 by COB.*** The offeror hereby agrees to do all w ork described in the documents entitled: ADAL Explosive Ordinance Disposal (EOD) Facility FXBM222375 (FY22) Ellsw orth AFB, South Dakota RETURN WITH OFFER: INFORMATION REQUIRED BY SECTION 00 10 00 (SF1442), SECTION 00 22 00 AND SECTION 00 45 00. THIS SOLICITATION IS RESTRICTED 100% TO SMALL BUSINESS INTEREST. The estimated construction cost of this project is between $5,000,000 and $10,000,000. Questions and/or comments relative to these documents should be submitted via Bidder Inquiry as indicated below. See instructions on when e-mail or mailing is appropriate. Mailing address is shown on the Standard Form SF 1442, Item 8, unless directed otherwise. Questions and/or comments relative to these bidding (proposal) documents that is proprietary in nature or if Bidder Inquiry system (See Below) is out of service should be submitted to the Contract Specialist: Contract Specialist - Primary POC: Scott Dwyer, Scott.Dwyer@usace.army.mil, (402) 995-2584 BIDDER INQUIRY Technical inquiries and questions relating to technical requirements, proposal procedures or bonds are to be submitted via Bidder Inquiry in ProjNet at: https://www.projnet.org/projnet/ No Later Than ten (10) calendar days before due date of proposals, in order that they may be given consideration or actions taken prior to receipt of offers. The Bidder Inquiry system is to be used to ask and receive answers to all non-proprietary questions. To submit and review inquiry items, prospective vendors will need to use the Bidder Inquiry Key presented below and follow the instructions listed below. A prospective vendor who submits a comment /question will receive an acknowledgement of their comment/question via email, followed by an answer to the comment/question after it has been processed by our technical team. All timely questions and approved answers will be made available through ProjNet. The Solicitation Number is: W9128F23R0076 The Bidder Inquiry Key is: YKJ86F-36ANDH *The value for this project is based on a financial range. The value is listed as the highest possible cost from the range provided by a stakeholder or official project document. W9128F-19-D-0002

4,931 SF.

Division 03 -	Concrete, Concrete Forming, Cast-in-Place Concrete, Precast Concrete.
Division 04 -	Masonry, Unit Masonry.
Division 05 -	Metals, Structural Metal Framing.
Division 06 -	Wood, Plastics, and Composites.
Division 07 -	Thermal and Moisture Protection, Dampproofing and Waterproofing, Thermal Protection, Weather Barriers.
Division 08 -	Openings, Doors and Frames, Coiling Doors and Grilles, Windows.
Division 09 -	Finishes.
Division 10 -	Specialties, Signage, Fire Protection Specialties.
Division 11 -	Equipment, Loading Dock Equipment, Loading Dock Bumpers, Stationary Loading Dock Equipment, Portable Dock Equipment, Loading Dock Lights.
Division 21 -	Fire Suppression, Instrumentation and Control for Fire-Suppression Systems.
Division 22 -	Plumbing, Instrumentation and Control for Plumbing.
Division 26 -	Electrical, Instrumentation and Control for Electrical Systems, Interior Lighting, Emergency Lighting, Exit Signs, Exterior Lighting, Lighting Poles and Standards, Parking Lighting, Flood Lighting.
Division 27 -	Communications.
Division 31 -	Earthwork, Site Clearing, Clearing and Grubbing, Grading.
Division 32 -	Exterior Improvements, Bases, Ballasts, and Paving, Flexible Paving, Rigid Paving, Curbs, Gutters, Sidewalks, and Driveways, Paving Specialties, Pavement Markings, Fences and Gates, Screening Devices.
Division 33 -	Utilities, Water Utilities, Sanitary Sewerage Utilities, Storm Drainage Utilities.