Bittersweet Club House Roof

Removal and disposal of all current roof materials down to the wood decking. Remove old and supply and install 300 square feet of plywood roof sheathing at the northwest corner of building. Supply and install Ice and Water Shield minimally to the first 36 inches from the fascia and valleys and cover all exposed roof decking with a minimum of 30# roof felt in all areas with greater than a 3/12 pitch. Supply and install minimum thirty (30) year laminated Forest Green architectural shingles to all areas with greater than a 3/12 pitch. Supply and install a sealed down base sheet to all areas with less than a 3/12 pitch. Supply and install Modified Bitumen Membrane to all roof areas with less than a 3/12 pitch. Remove old and supply and install new ridge vents with color matching ridge cap shingles. Remove old and supply and install new lead flashing to all pipe vents. Reinstall and flash around all roof penetrations and utilizing flashing kits, minimal amount of roofing cement and/or caulk shall be utilized. Remove old and supply and install new white aluminum Gutter Apron Flashing. Remove old and supply and install new white aluminum Rake Edge Flashing. Supply and install new roof to wall vents on the lower sections on the north and south sides of the building, these vents are currently in place, therefore it will just be replacing them with new ones. Complete tuck pointing and repairs to brick chimney. The job site needs to be left broom cleaned each evening and on completion of the project the pavement, lawn, gutters and downspouts will be cleaned and debris free.

Division 07 -

Thermal and Moisture Protection, Dampproofing and Waterproofing, Thermal Protection.