Biomedical Research 'C' Wing Lab Renovations - Phase 2

Biomedical Research ‘C’ Wing Renovations – Phase 2 will consist of the remodel to approximately 6,500 SF of existing lab space in the ‘C’ wing of University’s Biomedical Research facility. The project will include lab space, culture rooms, walk-in cooler, office space and other support areas. These renovations will bring the lab into substantial compliance with current mechanical, electrical, and plumbing codes, TAS/ADA standards and other governing agency requirements. The project will include: 1) Demolition of casework, windows, doors, walls, and MEP systems. 2) Installation of new laboratory casework, MEPs and overhead carriers for a complete system. 3) Construction materials will be similar to the materials found in ‘A’ wing of the Biomedical Research facility. 3) Mechanical upgrades to control temperature, humidity, air changes, negative and positive pressures. 4) Installation of new lab casework and equipment. 5) Temperature controls for a complete and functioning system. Controls shall be by Johnson Controls. 6) Dust control during construction, to include maintaining negative air pressure during construction, utilizing sticky mats, and maintaining construction barriers. These renovations, including all MEP work, are described in more detail in the Construction Documents dated 1/28/2021 & 3/18/2020 prepared by SM Architects.

Division 02 -	Existing Conditions, Demolition, Selective Demolition, Selective Interior Demolition.
Division 06 -	Wood, Plastics, and Composites, Rough Carpentry, Finish Carpentry.
Division 07 -	Thermal and Moisture Protection, Dampproofing and Waterproofing, Thermal Protection.
Division 08 -	Openings, Doors and Frames, Windows.
Division 09 -	Finishes, Plaster and Gypsum Board, Ceilings, Flooring, Painting and Coating.
Division 21 -	Fire Suppression.
Division 22 -	Plumbing.
Division 23 -	Heating, Ventilating, and Air Conditioning (HVAC), Instrumentation and Control for HVAC, HVAC Air Distribution.
Division 26 -	Electrical, Lighting.