Routing and Crack Sealing MT-2 Butte South

Provide all labor, materials, equipment, traffic control and incidentals necessary to crack seal 8.4 miles of road on route MT-2. Average roadway width is 24 feet. Cracks shall be routed and sealed per the special provisions. Contractor shall be responsible for all private property damage claims resulting from performance of the tasks described above. Questions or information relating to either specifications or requirements of this solicitation must be asked through the portal Q&A Board. Potential bidders must log into portal to submit a question on the Q&A Board. WORK IS REQUIRED TO BE COMPLETED ON OR BEFORE: SEPTEMBER 30, 2022 The Maintenance Chief reserves the right to make, in writing, at any time during the work, such changes in quantities and such alterations in the work as are necessary to satisfactorily complete the project. Such changes in quantities and alterations shall not invalidate the contract nor release the surety, and the Contractor agrees to perform the work as altered. If additional work or changes in quantity significantly change the scope of work, an adjustment will be made to the contract. A significant change is defined as an increase in excess of 125% or a decrease below 75% of the original contract quantity item. Any adjustment for an increase in quantity shall apply only to that portion in excess of 125% of the original contract item quantity, or in case of a decrease below 75%, to the actual amount of work performed.

Division 32 -	Exterior Improvements, Operation and Maintenance of Exterior Improvements.
Division 34 -	Transportation, Operation and Maintenance of Transportation.