Automatic Gate - Water Shop

The gate is to slide along an existing fence. Contractor will have to remove the existing end post on that fence and install, at a minimum, thee (3) 4" diameter, LG-40 posts to support the gate. New end posts are to be powder coated green, and cemented in, at a minimum of 3' depth. Gate: Gate is to be 31' wide x 6' high, plus three rows of barbwire on top of the gate. Outside frame is to be 2 3/8", LG-40. Eight (8) Vertical Upright Bracing, 1 7/8", LG-40. Eight (8) Diagonal Bracing, 1 7/8", LG-40. Two (2) Horizontal Bracing, 1 7/8", LG-40. All gate frame material is to be black powder coated. Attach 11-8 extruded bonded chain-link fabric, and three rows of black vinyl coated barbwire. Barbwire framing is to be black powder coated. See the attached rough sketch of the gate. Gate is to slide on six (6) nylon cantilever rollers.

Division 32 -

Exterior Improvements, Fences and Gates.