Energy Savings Improvement Program (ESIP) Energy Conservation Measures: ECM-2: Mechanical & ECM-3: Building Management Systems Mechanical

This project is being rebid and ECM 4 is no longer a portion of this project moving forward. This rebid is only for ECM 2 and ECM 3. All technical questions, comments, and inquiries should be directed to DRG (Attention: Patrick Seiwell at Telephone #732-560-7900 or Email: patricks@drg-architects.com ECM-2A.1 Refurbish Unit Ventilator at Walter T. Bergen ECM-2A.2 Replace Unit Ventilators at Martha B. Day ECM-2B Addition of Tempered Ventilation Martha B. Day ECM-2C Exhaust Fan Replacement Bloomingdale School District 225 Glenwild Avenue Bloomingdale, NJ 07403 Proposed ESCO Energy Savings Improvements for: Bloomingdale Public Schools Notice is hereby given that sealed bids are sought and requested by Honeywell Building Technologies (hereinafter called "ESCO"), for two energy saving improvement contracts for the Bloomingdale School District (hereinafter called "BSD") in Bloomingdales, NJ. Bidders shall be advised that the scope of work in the specification packages is for turn-key construction services that include audit and design work as well as construction. In so much that each contractor bidding this work must have the capability for both: Project: Bloomingdale School District: Proposed ESCO Energy Savings Improvements Bidding documents shall be available as a Link or Flash Drive (FD). A One Hundred ($100) Dollar non-refundable deposit via cash, check (made payable to DRG Architects (DRG), Visa or MasterCard, is required for each Link or FD. Documents can be sent via UPS or FedEx with your account number or a link via email. All technical questions, comments, and inquiries should be directed to DRG (Attention: Patrick Seiwell at Telephone #732-560-7900 or Email: patricks@drg-architects.com Further information may be obtained by contacting Bloomingdale School District, at Telephone # 973-838-0555 Bids, utilizing the bid forms as prepared by the Engineer, may be submitted in person, by mail or delivery service prior to that time. Any bid submitted by mail or delivery service is done so at the sole risk of the bidder. No Bids will be received by facsimile or electronic transmission. It is expressly understood that the bidder is responsible for getting the bid proposals to the BSD Board Office prior to the time and date set for the bid opening. Any bid received after the closing time will be returned unopened. In order to be considered, bids must be sealed, and outer envelope clearly marked, specifying the appropriate Prime Bid ECM: Bloomingdale School District ESCO Energy Savings Improvements: ECM-2 & ECM-3: Mechanical ECM-4 Building Envelope Improvements The deadline for submitting questions to the Engineer is Monday, December 5, 2022, at 5:00 PM. Addendum shall be released to all registered Bidders and may be obtained directly from the office of the Engineer on Friday, December 9, 2022. Bids will be received from a Prime Contractor for one price for each ECM, all trades, all-inclusive. Bidders must be pre-qualified by the New Jersey Department of Treasury, Division of Property Management and Construction pursuant to N.J.S.A. 18A:18A-27, et. seq. Pursuant to N.J.S.A. 18A:18A-26, in order to be eligible to submit a Bid for the Project, the Bidder shall be classified by the New Jersey Department of Treasury, Division of Property Management and Construction in the following disciplines: EMC-2 & ECM-3: (C032) - HVACR ECM-4: (C008)- General Construction or (C017) Insulation No modifications to the enclosed Instructions to Bidders, General Conditions, Supplemental Conditions or Specification will be permitted prior to bid acceptance. Bids that propose modifications or substitutions to the requirements set forth in the Project Manual shall result in rejection of the bid as being non-responsive. Bidders shall submit a N.J. Business Registration, Certificate of Prequalification/Classification from the New Jersey Department of Treasury, Division of Property Management and Construction (DPMC) for the contractor and all major subcontractors and an Affidavit as to the Total Amount of Uncompleted Contracts for the contractor and all major subcontractors. Bidders are required to comply with the Public Works Contractor Registration Act, Chapter 238, Public Laws (N.J.S.A. 4:11-56.50 et. seq.), and be required to submit with the bid, evidence of contractor and major subcontractor registration with the New Jersey Department of Labor, Division of Wage and Hour Compliance. Bidders are required to comply with the requirements of N.J.S.A. 10:5-31, et seq., N.J.A.C. 6:4-1.6, and N.J.A.C. 17:27. Bidding shall be in conformity with the applicable requirements of the "Public School Contracts Law," N.J.S.A. 18A:18-1 et seq. and N.J.S.A. 18A:7G-1 et seq., the "Educational Facilities and Construction Financing" law. No bid may be withdrawn for a period of sixty (60) days after the opening date. The Board reserves the right to reject any and all bids and / or to waive any informality in the bidding, as permitted by law, if it is in the interest of the Board to do so. The Contract will be awarded to the lowest responsible bidder as defined in N.J.S.A 18A:18A-2. Pursuant to "The Public Works Contractor Registration Act," N.J.S.A. 34:11-56.50 et seq., Bidders and their subcontractors are required to be registered with the New Jersey Department of Labor and to possess a current Certification from said Department indicating compliance with the Act at the time of bidding. Bids must be accompanied by bid security in the form of (1) a bid bond or certified or cashier's check payable to the ESCO equal to 10% of the amount of the bid, but in no case to exceed $20,000.00 as per N.J.S.A. 18A: 18A-24 and (2) Certificate of Consent of Surety as per N.J.S.A. 18A:18A-25.

Division 03 -	Concrete, Concrete Forming and Accessories, Cast-in-Place Concrete, Precast Concrete.
Division 04 -	Masonry, Unit Masonry.
Division 05 -	Metals.
Division 06 -	Wood, Plastics, and Composites, Rough Carpentry, Finish Carpentry.
Division 07 -	Thermal and Moisture Protection, Dampproofing and Waterproofing, Thermal Protection.
Division 08 -	Openings, Doors and Frames, Specialty Doors and Frames, Entrances, Storefronts, and Curtain Walls, Windows, Hardware.
Division 09 -	Finishes, Plaster and Gypsum Board, Tiling, Ceilings, Resilient Flooring, Carpeting, Painting.
Division 10 -	Specialties, Visual Display Units, Chalkboards, Markerboards, Tackboards, Signage, Compartments and Cubicles, Toilet, Bath, and Laundry Accessories, Toilet Accessories, Emergency Aid Specialties, Fire Protection Specialties, Lockers, Flagpoles.
Division 11 -	Equipment, Foodservice Equipment, Foodservice Storage Equipment, Food Preparation Equipment, Food Delivery Carts and Conveyors, Food Cooking Equipment, Food Dispensing Equipment, Ice Machines, Educational and Scientific Equipment, Audio-Visual Equipment, Play Field Equipment and Structures.
Division 12 -	Furnishings, Casework, Countertops, Office Furniture, Institutional Furniture, Classroom Furniture.
Division 21 -	Fire Suppression.
Division 22 -	Plumbing, Common Work Results for Plumbing, Plumbing Piping, Plumbing Equipment, Plumbing Fixtures, Drinking Fountains and Water Coolers.
Division 23 -	Heating, Ventilating, and Air Conditioning (HVAC), Common Work Results for HVAC, Instrumentation and Control for HVAC, HVAC Air Distribution, Ventilation Hoods, Commercial-Kitchen Hoods.
Division 25 -	Integrated Automation.
Division 26 -	Electrical, Instrumentation and Control for Electrical Systems, Lighting, Interior Lighting, Emergency Lighting, Exit Signs, Exterior Lighting.
Division 27 -	Communications, Common Work Results for Communications, Structured Cabling, Voice Communications, Audio-Video Communications, Audio-Video Systems, Integrated Audio-Video Systems and Equipment, Integrated Audio-Video Systems and Equipment for Classrooms, Distributed Communications and Monitoring Systems.
Division 28 -	Electronic Safety and Security, Common Work Results for Electronic Safety and Security, Electronic Access Control and Intrusion Detection, Fire Detection and Alarm.
Division 31 -	Earthwork, Common Work Results for Earthwork, Grading, Earthwork Methods, Soil Treatment.
Division 32 -	Exterior Improvements, Flexible Paving, Rigid Paving, Fences and Gates, Irrigation, Planting, Turf and Grasses.
Division 33 -	Utilities, Water Utilities, Sanitary Sewerage Utilities, Storm Drainage Utilities, Electrical Utilities, Communications Utilities.