I-95 Delaware River Bridge on the PTC and NJTA

Improve the Delaware River Bridge and approaches, encompassing approximately 1.9 miles of I-95 extending from PTC milepost (MP) H-42.3 to the six-lane section of the New Jersey Turnpike at approximately MP P0.8. The improvements will include the replacement of the existing Delaware River Bridge and widening of approach roadways to accommodate a six-lane typical cross section with 12-foot lanes and 12-foot left and right shoulders. The bridge shall maintain a channel opening on the Delaware River of 636 feet horizontal and 135 feet vertical.

Division 01 -	General Requirements, Vehicular Access and Parking, Traffic Control, Temporary Barriers and Enclosures.
Division 03 -	Concrete, Concrete Reinforcing, Precast Structural Concrete.
Division 05 -	Metals, Structural Steel Framing, Structural Steel for Bridges, Steel Joist Framing, Steel Joist Girder Framing.
Division 07 -	Thermal and Moisture Protection, Expansion Control.
Division 09 -	Finishes, High-Performance Coatings.
Division 10 -	Specialties, Signage, Traffic Signage.
Division 26 -	Electrical, Exterior Lighting, Lighting Poles and Standards, Roadway Lighting.
Division 31 -	Earthwork, Embankments, Erosion and Sedimentation Controls, Slope Protection, Gabions, Riprap, Special Foundations and Load-Bearing Elements, Driven Piles.
Division 32 -	Exterior Improvements, Bases, Ballasts, and Paving, Flexible Paving, Rigid Paving, Fences and Gates, Retaining Walls.
Division 34 -	Transportation, Bridges.