Underground Storage Tank Tests

Perform testing on underground storage tanks. The contractor shall: a. Perform tank monitoring certification in accordance with manufacturer’s checklist. b. Perform overfill prevention verification test to ensure successful operation of overfill alarm systems and overfill devices. c. Perform spill bucket testing in accordance with procedures in PEI RP/1200. d. Perform automatic line leak detector (ALLD) test in accordance with LDT-890. e. Perform line tightness testing and re-calibrate in accordance with manufacturer’s instructions. Line tightness testing must be performed annually at or above operating pressure according to a maximum leak detection rate per test section volum

Division 02 -	Existing Conditions, Subsurface Investigation.
Division 03 -	Concrete, Concrete Reinforcing, Cast-in-Place Concrete.
Division 05 -	Metals, Structural Metal Framing, Metal Decking.
Division 23 -	Heating, Ventilating, and Air Conditioning (HVAC), Facility Fuel Piping, Facility Fuel-Storage Tanks.
Division 31 -	Earthwork, Clearing and Grubbing, Grading.
Division 32 -	Exterior Improvements, Fences and Gates.
Division 33 -	Utilities, Storm Drainage Utilities.