Peoria Street Bridge Replacement over the Little Burlington Ditch

The Peoria Street Bridge is located approximately 50 feet south of East 112th Ave on Peoria Street. It is a steel stringer and metal deck bridge with H-Pile foundation and abutments. Corrugated metal back walls support the earth embankment. The bridge is to be removed and replaced with a cast in place four sided box culvert. The Box Culvert is in the FRICO irrigation ditch, Little Burlington Ditch and will require following FRICO guide lines for working in their easement.

Division 01 -	General Requirements, Vehicular Access and Parking, Traffic Control, Temporary Barriers and Enclosures.
Division 03 -	Concrete, Concrete Reinforcing, Precast Structural Concrete.
Division 05 -	Metals, Structural Steel Framing, Structural Steel for Bridges, Steel Joist Framing, Steel Joist Girder Framing.
Division 07 -	Thermal and Moisture Protection, Expansion Control.
Division 09 -	Finishes, High-Performance Coatings.
Division 10 -	Specialties, Signage, Traffic Signage.
Division 26 -	Electrical, Exterior Lighting, Lighting Poles and Standards, Roadway Lighting.
Division 31 -	Earthwork, Embankments, Erosion and Sedimentation Controls, Slope Protection, Gabions, Riprap, Special Foundations and Load-Bearing Elements, Driven Piles.
Division 32 -	Exterior Improvements, Bases, Ballasts, and Paving, Flexible Paving, Rigid Paving, Fences and Gates, Retaining Walls.
Division 33 -	Utilities, Storm Drainage Utilities, Ponds and Reservoirs.
Division 34 -	Transportation, Bridges.
Division 35 -	Waterway and Marine Construction, Shoreline Protection, Waterway Construction and Equipment.