Sand Transfer Plant -Well Intake Repairs

The Town of Palm Beach, Florida ("the Town"), is hereby requesting bids from qualified firms to furnish all labor, management, materials, and equipment to make necessary well intake repair in Sand Transfer Plant of Town of Palm Beach. Brief scope of work: Remove the debris from the damaged valve vault and install a Town supplied marker in the location of the connection. Remove the existing pipe work from well casing that is exposed to the flange just outside of the electrical vault, to the south (Approximately 60' of 10" cast iron pipe). Replace all parts with same as removed (steel tee, blind flange, check valve, pipe work and 3/4 " saddle tap). Bury with sand left near site (do not bring sand in from offsite). Final completion shall be before March 1st, 2023. Town Project Manager expects work to be accomplished within three business days from Notice to Provide, but we are giving five business days to awarded contractor for this job. Any delay after five business days shall enforce liquidated damages. Town doesn't posses any plans or drawings for this project. Attached with this Invitation To Bid are some photos of the pipe work that needs replaced due to Hurricane Nicole and clean up around the damaged valve vault. Bid Bond if bid goes over 100k The Town reserves the right to accept or reject any and all bids and to waive any technicalities or irregularities therein. The Town further reserves the right to award the contract to that proposer whose proposal best complies with the ITB requirements. No proposer may withdraw their proposals for a period of one hundred and eighty (180) days from the date set for the opening thereof.

Division 02 -	Existing Conditions, Subsurface Investigation.
Division 03 -	Concrete, Precast Concrete.
Division 04 -	Masonry, Unit Masonry.
Division 05 -	Metals, Structural Metal Framing, Metal Fabrications.
Division 06 -	Wood, Plastics, and Composites, Rough Carpentry.
Division 07 -	Thermal and Moisture Protection, Dampproofing and Waterproofing, Thermal Protection.
Division 08 -	Openings, Doors and Frames, Windows, Hardware.
Division 09 -	Finishes, Painting and Coating.
Division 10 -	Specialties, Signage, Compartments and Cubicles, Emergency Aid Specialties, Fire Protection Specialties, Storage Assemblies.
Division 11 -	Equipment, Laboratory Equipment.
Division 14 -	Conveying Equipment.
Division 21 -	Fire Suppression, Fire-Extinguishing Systems.
Division 22 -	Plumbing, Instrumentation and Control for Plumbing, Plumbing Piping, Plumbing Equipment, Plumbing Fixtures.
Division 23 -	Heating, Ventilating, and Air Conditioning (HVAC), Instrumentation and Control for HVAC, HVAC Air Distribution.
Division 26 -	Electrical, Instrumentation and Control for Electrical Systems, Interior Lighting, Emergency Lighting, Exit Signs, Exterior Lighting.
Division 27 -	Communications, Structured Cabling, Data Communications, Voice Communications, Distributed Audio-Video Communications Systems.
Division 28 -	Electronic Safety and Security, Electronic Access Control and Intrusion Detection, Access Control, Intrusion Detection, Electronic Surveillance, Electronic Detection and Alarm.
Division 31 -	Earthwork, Earthwork Methods.
Division 32 -	Exterior Improvements, Flexible Paving, Rigid Paving, Curbs, Gutters, Sidewalks, and Driveways, Fences and Gates, Turf and Grasses.
Division 33 -	Utilities, Instrumentation and Control for Utilities, Water Utilities, Water Utility Distribution Piping, Water Utility Distribution Equipment, Disinfecting of Water Utility Distribution, Water Utility Storage Tanks, Storm Drainage Utilities, Electrical Utilities, Communications Utilities.
Division 44 -	Pollution and Waste Control Equipment, Common Work Results for Pollution and Waste Control Equipment, Air Pollution Control, Noise Pollution Control, Odor Control, Water Pollution Control Equipment, Solid Waste Control and Reuse, Waste Thermal Processing Equipment, Fluidized Bed Combustion Equipment, Rotary Kiln Incinerators, Pyrolysis Equipment, Hazardous Waste and Medical Waste Incinerators, Heat Recovery Equipment for Waste Thermal Processing, Synthesis Gas Cleanup and Handling Equipment.