Napili WWPS No. 3 Renovations

The work covered under this contract will be performed at the existing Napili WWPS No. 3. Work will include furnishing of labor, materials, supplies and equipment required for demolition and removal of pumps, piping and appurtenances; abandonment of the existing dry well; modifications to the existing wetwell; installation of wet pit submersible pumps, piping and appurtenances; electrical modifications; replacement of existing diesel emergency generator, and sewage bypassing during construction; and supporting sitework. The work covered under this contract will be performed at and adjacent to the existing Napili WWPS No. 3. This project is a State Revolving Fund (SRF) funded project All projects funded with SRF federal or state-match funds must comply with all federal regulations listed as applicable Cross-cutter regulations which have been determined as applying to the SRF loan program Percentage (%) of the total cost of the project which will be financed with SRF money - 100% Dollar amount of SRF funds for the project - $4,000,000. Percentage (%) and dollar amount of the total costs of the project that will be financed by non-governmental sources - 0%. Bidders are required to comply with newest procurement code, HRS, Chapter 103-D, any rules and regulations and policy directives issued with respect to Chapter 103-D and any amendments thereof. Bidders shall be licensed in accordance with Chapter 444, HRS, relating to the licensing of contractors. The Contractor and his Subcontractor(s), if any shall comply with all applicable revisions of the prevailing wage rate schedule as required under Chapter 104, H.R.S No proposal will be considered unless accompanied by one of the following forms of bidders security: cash, a cashiers check, or a certified check on a bank insured by the Federal Deposit Insurance Corporation, or a bidders bond executed by an approved surety insurer, made payable to the Director of Finance in the manner, form, and amount required by Section 103D-323 of the Hawaii Revised Statutes. The proposal guaranty shall be equal to at least five percent (5%) of the total amount of the bid submitted Bidders must correctly prepare and submit the documents listed in Section 00300, Bid Proposal. 1. Construction of pump improvements, including three new submersible pumps in a modified existing wetwell and new discharge piping, valves and appurtenances. A new engine-driven backup pump in a weatherproof and sound attenuated enclosure will also be installed. 2. Abandonment of existing drywell, and removal of existing pumps, piping, valves and appurtenances. Remove existing fuel storage tank. 3. Electrical modifications and upgrade work, including new pump motor starters & controls, emergency generator with integral fuel tank, manual transfer switch (MTS), and automatic transfer switch (ATS). 4. Structural, architectural and mechanical repairs and upgrades to the existing building, including roofing replacement, interior/exterior painting; new doors; and split air conditioning unit. 5. Miscellaneous sitework and restoration, testing, startup and training

Division 02 -	Existing Conditions, Subsurface Investigation.
Division 03 -	Concrete, Precast Concrete.
Division 04 -	Masonry, Unit Masonry.
Division 05 -	Metals, Structural Metal Framing, Metal Fabrications.
Division 06 -	Wood, Plastics, and Composites, Rough Carpentry.
Division 07 -	Thermal and Moisture Protection, Dampproofing and Waterproofing, Thermal Protection.
Division 08 -	Openings, Doors and Frames, Windows, Hardware.
Division 09 -	Finishes, Painting and Coating.
Division 10 -	Specialties, Signage, Compartments and Cubicles, Toilet, Bath, and Laundry Accessories, Emergency Aid Specialties, Fire Protection Specialties, Fire Extinguishers, Storage Specialties, Storage Assemblies.
Division 11 -	Equipment, Laboratory Equipment.
Division 12 -	Furnishings.
Division 14 -	Conveying Equipment, Scaffolding.
Division 21 -	Fire Suppression, Fire-Extinguishing Systems.
Division 22 -	Plumbing, Instrumentation and Control for Plumbing, Plumbing Piping, Plumbing Equipment, Plumbing Fixtures.
Division 23 -	Heating, Ventilating, and Air Conditioning (HVAC), Instrumentation and Control for HVAC, HVAC Air Distribution.
Division 26 -	Electrical, Instrumentation and Control for Electrical Systems, Interior Lighting, Emergency Lighting, Exit Signs, Exterior Lighting.
Division 27 -	Communications, Structured Cabling, Data Communications, Voice Communications, Audio-Video Systems, Distributed Audio-Video Communications Systems.
Division 28 -	Electronic Safety and Security, Electronic Access Control and Intrusion Detection, Access Control, Intrusion Detection, Electronic Surveillance, Electronic Detection and Alarm.
Division 31 -	Earthwork, Earthwork Methods.
Division 32 -	Exterior Improvements, Flexible Paving, Rigid Paving, Curbs, Gutters, Sidewalks, and Driveways, Fences and Gates, Turf and Grasses.
Division 33 -	Utilities, Common Work Results for Utilities, Instrumentation and Control for Utilities, Water Utilities, Water Utility Distribution Piping, Water Utility Distribution Equipment, Water Utility Pumping Stations, Disinfecting of Water Utility Distribution, Water Utility Storage Tanks, Wastewater Utility Pumping Stations, Sanitary Utility Sewerage Force Mains, Storm Drainage Utilities, Electrical Utilities, Communications Utilities.
Division 40 -	Process Integration, Water Process Piping.
Division 44 -	Pollution and Waste Control Equipment, Common Work Results for Pollution and Waste Control Equipment, Air Pollution Control, Noise Pollution Control, Odor Control, Water Pollution Control Equipment, Solid Waste Control and Reuse, Waste Thermal Processing Equipment, Fluidized Bed Combustion Equipment, Rotary Kiln Incinerators, Pyrolysis Equipment, Hazardous Waste and Medical Waste Incinerators, Heat Recovery Equipment for Waste Thermal Processing, Synthesis Gas Cleanup and Handling Equipment.
Division 45 -	Industry-Specific Manufacturing Equipment.
Division 46 -	Water and Wastewater Equipment.