City Building Window Cleaning Services

The Contractor will be required to furnish all necessary labor, equipment, tools and materials for cleaning all windows, glass doors at the locations listed in these specifications. Windows shall be cleaned in such a manner as to cause a minimum amount of inconvenience and/or disturbance to building occupants. Glass washing shall be done with clean water and necessary equipment to remove all dirt, grease or stains and shall be left dry. The use of cleaning agents shall be allowed in solution with the water, but only such materials will be allowed that are not damaging to painted, varnished, or building surfaces. All work shall be done in a workmanlike manner and premises in the vicinity of the work shall be left clean. Glass is clean when all window surfaces are without streaks, film, deposits, and stain and have a uniform bright appearance. Contractor shall clean excess cleaning solution off window ledge and sills. When washing has begun on a building, the Contractor shall finish all glass in the building with no absences from the job unless due to weather. The Contractor shall be responsible for providing and for the placement of barricades, tarps, plastic, flag tape and other safety/traffic control equipment required to protect its employees, the public, surrounding areas, equipment, and vehicles. As well as traffic control permits from the Engineering Department. For list of locations, please see the next page.

Division 01 -

General Requirements, Cleaning and Waste Management.