NPS Nathan Hale Middle School Sound and Lighting Upgrades for Stage

- Replace outdated stage lighting system with ETC LED stage lights and control system with touchpad controller and button operation. DMX controller port to be provided for use of external controller that is not included. - Install 22 LED color changing lights above the stage in two locations and from two locations on the ceiling out in front of stage. - Provide one, 115volt, 20 amp receptacle at each location along with control wire. - Install a power relay module at each location so that the power for the lightsis off when not in use. Nine LED lights can share the same power circuit. - Rehang two existing 1.5” ID schedule 40 metal pipes on stage for proper height. - Install two new 1.5” ID schedule 40 metal pipe from wood trussesin front of stage to support frontstage lights. - This will need to be certified by a structural engineer prior to installation and that cost is estimated. - Removal of existing stage lights. - Install new sound system including four hanging microphones, fourstand mounted chorus microphones, five new wireless clip-on microphones(One will be both handheld and clip- on) with proper antenna distribution system, portsfor wired microphones, Bluetooth receiver, two playback speakers located under repositioned existing main speakers. This will all be operated from a rack mounted sixteen-channel digital mixer 6 with iPad control for ease of operation. iPad not included. Install three existing wireless micsinto rack and connect to antenna distribution system. Provide additional microphone cables. Length to be determined.

Division 26 -	Electrical.
Division 27 -	Communications, Common Work Results for Communications.
Division 28 -	Electronic Safety and Security, Common Work Results for Electronic Safety and Security.