Disinfecting Cleaning/Remediation

Clean and disinfect office/communal areas that have known to occupy individuals suspected or confirmed to have COVID-19. Cleaning & Disinfectant products shall be in accordance with the approved list of approved Disinfectants for Use Against SARS-CoV-2 at U.S. Department of Environmental Protection Agency located at https://www.epa.gov/pesticide-registration/list-n-disinfectants-use-against-sars-cov-2. Specific Requirements: Contractor shall conduct disinfection activities consistent with the CDC guidance utilizing applicable methods and EPA-approved COVID-19 disinfectants. Surfaces shall be cleaned using EPA-approved disinfectant in accordance with the product specifications (e.g., concentration, application method and contact time, and use of personal protective equipment). Contractor shall clean/sanitize potentially exposed or frequently touched areas within an identified area to include but not limited to: doors, door knobs, door frames, windows, desks, chairs, computers, computer peripherals, printers, copying machines, hand rails, latrines, sinks, faucets, water bubblers, filing cabinets, light switches, walls (up to six feet), and interior heating & cooling air intakes. Sensitive equipment, such as electronics or other non-compatible materials, will be sanitized with a minimum 70% alcohol solution. Surfaces that are found to be covered with accumulated dirt/dust shall be initially cleaned with wet wipes (soap and water) prior to disinfection. Under no circumstances shall dry-sweeping/wiping, dusting, or vacuuming be allowed. Contractor shall open all windows leading to the outside to provide room ventilation but shall minimize opening and closing of room interior doors until disinfection is complete. Contractor may use disinfectant fogging or ionizing spray applications if applicable, but only under the following conditions: the disinfectant meets the requirements of CDC for COVID-19 disinfection and the application is performed according to the manufacturer’s recommendation including worker protection, and the application will not damage surface materials in the area. Contractor shall establish appropriate staging areas for donning PPE on/off and waste collection areas to allow for a quick and efficient cleaning/sanitization of an area for the immediate return of personal. All contractor generated waste shall managed as a Category A biological waste. Waste material shall be packaged, containerized, and transported offsite for disposal in accordance with 49CFR500-599. All manifests/bills of laden shall be signed and approved by CCAD's DOD certified transporter of biological materials. Contractor performing this work shall at minimum have current training in blood-borne pathogens and be respirator certified for Level C PPE as defined by National Institute for Occupational Safety and Health (NIOSH) and Occupational Safety and Health Administration (OSHA) (29 C.F.R. 1910) All cleaners and disinfectants shall be used in accordance with the manufacturer’s recommendations. Prior to entering the area, the contractor shall put on appropriate personal protective equipment (PPE) required for the specific cleaners and disinfectants used. Work shall be invoiced on a square-foot basis. See attachment for CLIN Structure to provide pricing.

Division 02 -

Existing Conditions, Hazardous Material Assessment, Site Remediation, Contaminated Site Material Removal, Asbestos Remediation, Asbestos Abatement, Removal and Disposal of Asbestos Containing Materials.