Place Sod at L-73 Section 2B (Jane Green)

Contractor shall provide all materials, labor, and equipment necessary to install and place sod as directed by the District’s project manager. Work limits extend from just inside the fence off US192 to past the S161A structure for a total of approximately 3.6 miles. Sod placed in this location shall vary in width from 6-10 feet, except as directed by the District’s project manager. The sod type shall be Argentine Bahia sod. All sod shall be pinned with U shaped pins on slopes greater than 3-1 slope. Palletted sod shall be installed in a staggered pattern such that seams do not match in order to minimize erosion potential. Slopes will be prepared (flat) for sod installation prior to installation, the vendor is responsible for repairing ruts caused by his operations before and after placing sod. District staff shall inspect the installation for approval of sod condition and placement the day the sod is placed.

Division 32 -

Exterior Improvements, Operation and Maintenance of Exterior Improvements, Irrigation, Planting Irrigation, Planting Preparation, Soil Preparation, Landscape Grading.