HVAC Design Services

The Work is for the replacement of heating, ventilation and air conditioning systems (HVAC) in Marsh Administration Building and Science Hall. 4.1 Phase I – Assessment and Schematic Design 4.1.1 Perform a site evaluation of the complete existing HVAC systems, mechanical rooms, and existing electrical distribution systems related to replacing the existing hot water/chilled water roof top HVAC systems with IPax (DX) Units and evaluation of the existing PTAC units throughout both buildings for reuse or replacement. Identify any Architectural issues relative to replacing any PTAC units and wall repair as needed, if necessary. 4.1.1.1Obtain existing building plans from Concord University Physical Plant staff and perform field evaluation to identify the existing systems components and calculate new heating/cooling loads to ensure all new systems components and end devices are properly sized. 4.1.2 Prepare a detailed technical report identifying deficiencies of the existing HVAC and electrical systems and make recommendations for stated upgrades/replacements. The technical memorandum shall identify the systems by each building and include budgetary estimates. 4.1.3 Provide a through schematic design for a new HVAC system and all associated equipment to coordinate with existing DDC Controls from Trane Technologies. Provide a comprehensive schematic construction cost estimate covering all aspects of this project at a schematic design phase. Also provide suggestions, if any, for installing such a new HVAC system in phases.

Division 23 -

Heating, Ventilating, and Air Conditioning (HVAC), Instrumentation and Control for HVAC, HVAC Air Distribution, Central HVAC Equipment.