Pot Perm System Rehabilitation

The existing Pot Perm storage and feed system consists of two complete independent feed trains including two separate silos. The only component shared between the two trains is the splitting mixing tank. Work consists of rehabilitating both feed trains with new equipment. The only component of the existing system to be reused is the storage silos. The major components of the new system for each train consist of the following items: - Storage Silos with bin vent filters (Existing silos will be reused) - Knife Gate on silo outlet - Volumetric Feeder - Wetting Cone - Splitter Arrangement to deliver Pot Perm to two application points - Control System including Motor Controls A complete and operating system with two feed trains shall be supplied and installed and is to include all mechanical, electrical, instrumentation & controls, piping, civil, structural components as necessary, and Start-Up & Commissioning. Additional items to be included in Scope of Work: - Demolition and disposal of existing system - All materials and components are to be supplied as part of the scope of supply and work. The Owner is not suppling any of the system components (except the existing silos).

Division 02 -	Existing Conditions, Subsurface Investigation.
Division 03 -	Concrete, Concrete Reinforcing, Cast-in-Place Concrete.
Division 05 -	Metals, Structural Metal Framing, Metal Decking.
Division 23 -	Heating, Ventilating, and Air Conditioning (HVAC), Facility Fuel Piping, Facility Fuel-Storage Tanks.
Division 31 -	Earthwork, Clearing and Grubbing, Grading.
Division 32 -	Exterior Improvements, Fences and Gates.
Division 33 -	Utilities, Storm Drainage Utilities.