Construction Journal Try for free >
Similar Projects
Z--Refinishing of Gymnasium Floors
Bidding
Camp Lejeune, NC
Dixon Elementary School VCT Floor Replacement
Post-Bid
Holly Ridge, NC 28445
Hunters Creek Middle School VCT Floor Replacement
Post-Bid
Jacksonville, NC 28546
Refinishing Gymnasium Floors
Results
Jacksonville, NC
Reversible Dance Floor
Results
Richlands, NC 28574
White Oak High School VCT Floor Replacement
Post-Bid
Jacksonville, NC 28546
VCT Floor Tile
Results
Less than $15,535 est. value
Jacksonville, NC
Removal and Replacement Gymnasium Floor Swansboro Middle School Annex
Post-Bid
Swansboro, NC 28584
Removal and Replacement Gymnasium Floor Jacksonville High School
Results
Less than $89,775 est. value
Jacksonville, NC 28540
Removal and Replacement Gymnasium Floor Northwoods Park Middle School
Post-Bid
Jacksonville, NC 28540
Jack Amyette Recreation Center Floor Tile Replacement
Results
Less than $13,712 est. value
Jacksonville, NC
Dixon Elementary Multipurpose Room Floors
Post-Bid
Holly Ridge, NC 28445
Commons Recreation Center Flooring Replacement
Results
Less than $13,260 est. value
Jacksonville, NC 28546
Dance Floor for Richlands High School
Post-Bid
Richlands, NC 28574
New Bridge Middle Gym Floor Replacement
Results
Jacksonville, NC 28540

Flooring Construction Project Lead, Holly Ridge, NC 28445   (Onslow County)

Share
Reported 04/12/2019 12:00 AM
Project Title

Dixon High School VCT Floor Replacement
Physical Address View project details and contacts
City, State (County) Holly Ridge, NC 28445   (Onslow County)
Category(s) Single Trades
Sub-Category(s) Flooring
Contracting Method Competitive Bids.
Project Status Request for Proposals (RFP)
Bids Due View project details and contacts
Estimated Value
Plans Available from County Agency
Owner View project details and contacts
Architect View project details and contacts
Description 1. Provide and Store the VCT material in a secure, clean, and dry location. 2. Maintain temperature between 55 degrees and 85 degrees Fahrenheit. 3. Provide for the delivery of all materials needed by contractor to complete the installation of VCT flooring. Specifications: 1. It is the responsibility of the general contractor/construction manager to ensure that project/site conditions are acceptable for the installation of the VCT flooring. 2. Verify that the area in which the VCT Flooring will be installed is dry and weather tight. Verify that permanent heat, light and ventilation are installed and operable. 3. All products delivered to the job site must be within the shelf-life approved by the manufacturer. 4. Verify that there are no foreign materials or objects on the subfloor and that the subfloor is clean and ready for installation. 5. Verify that surfaces and working conditions are in accordance with manufacturer's recommendations. 6. Sweep the concrete slab so as to remove all dirt and dust. If a sweeping compound is to be used it must be a sweeping compound that does not contain oil or other items that may inhibit the adhesive bond. 7. Follow OSHA guidelines. 8. The installation area shall be closed to all traffic and activity for a period to be set by installer. 9. All necessary precautions should be taken to minimize noise, smell, dust, the use of hazardous materials and any other items that may inconvenience others. 10. Remove all unused materials, tools, and equipment and dispose of any debris properly.
Details
Division 09 - Finishes, Flooring.
Bidder's List View project details and contacts
Prospective Bidders View project details and contacts
Project Documents
 Engineered Spec Sheet
 Architectural Plans
 Other Documents