Saint John's River Power Park Byproducts Storage Area Decommissioning

The Work consist of, but is not limited to the following: 1. Excavation and relocation of coal combustion residual wastes located outside the final limit of waste boundary as shown on the drawings, including placement and compaction of excavated materials within the BSA-B limit of waste boundary. 2. Construction of the containment berm and perimeter ditch on the northern and western sides of BSA-B. 3. Excavation of storm water Pond A to the lines and grades shown on the drawings. Clean excavated materials may be used for general fill. Work also includes the removal/abandonment of two existing control structures. 4. Abandonment and demolition of the contact water force main and associated pump station. Work also includes the removal of sediments from the contact water ponds and grading of contact water ponds to the grades and lines shown in the drawings. 5. Grading and compaction of the final cover subgrade to the lines and grades shown on the drawings. 6. Installation of the LLDPE cover system with 18-inch thick granular fill protective cover and 6-inch thick topsoil and sod. The closure system includes a layer of geotextile above the LLDPE with toe drain system as indicated on the plans. Work also includes construction of rim and final cover bench ditches with underdrain piping. 7. Installation of stormwater management system components including downlet pipes, transition structures, energy dissipators, and culverts. Work also includes grading of perimeter ditch channels.

Division 02 -	Existing Conditions, Subsurface Investigation.
Division 31 -	Earthwork, Grading, Earthwork Methods.
Division 33 -	Utilities.