Marconi Avenue Overhead Joint Repair

Partial removal of the bridge deck and sidewalk at existing strip joint seal assemblies at Abutments 1 and 5. Removal of existing strip joint seal assemblies and installation of new strip joint seal assemblies at Abutments 1 and 5. Replacement of elastomeric bearings at both abutments, including jacking and temporary support of the bridge superstructure, removal and replacement of sidewalk joint armor at both abutments, and resetting of curb plates at both abutments. The location of work is on the Marconi Avenue Overhead between Kenwood Street and Marconi Circle. The bridge alignment is straight and is oriented roughly from northwest to southeast. For purposes of this project, it will be assumed to be west to east, with Abutment 1 at the west end and Abutment 5 at the east end. The west approach to the overhead carries Arcade Boulevard; the east approach carries Marconi Avenue.

Bridge, Renovation.

Division 01 -	General Requirements, Vehicular Access and Parking, Traffic Control, Temporary Barriers and Enclosures.
Division 03 -	Concrete, Concrete Reinforcing, Precast Structural Concrete.
Division 05 -	Metals, Structural Steel Framing, Structural Steel for Bridges, Steel Joist Framing, Steel Joist Girder Framing.
Division 07 -	Thermal and Moisture Protection, Expansion Control.
Division 09 -	Finishes, High-Performance Coatings.
Division 10 -	Specialties, Signage, Traffic Signage.
Division 26 -	Electrical, Exterior Lighting, Lighting Poles and Standards, Roadway Lighting.
Division 31 -	Earthwork, Embankments, Erosion and Sedimentation Controls, Earthwork Methods, Slope Protection, Gabions, Riprap, Special Foundations and Load-Bearing Elements, Driven Piles.
Division 32 -	Exterior Improvements, Bases, Ballasts, and Paving, Flexible Paving, Asphalt Paving, Rigid Paving, Concrete Paving, Curbs, Gutters, Sidewalks, and Driveways, Fences and Gates, Retaining Walls.
Division 34 -	Transportation, Bridges.