Cedar Island Dock Repairs

Bulkhead: The Contractor shall remove and replace fifty-six (56) 2in x 8in, 8ft wooden retaining boards, remove and replace two (2) 2in x 4in, 12ft walers, remove and replace one (1) 2in x 8in, 8ft top cap, remove and replace three (3) 2in x 4in, 11ft top caps, remove and replace six (6) 6in x 6in, 10ft support piles and remove and replace five (5) of ½ inch tieback rods with deadmen assemblies, 10ft long. Dock: The Contractor shall remove and replace approximately one hundred and thirty (130) 2in x 8in, 12ft long wooden deck boards, remove and replace twenty-two (22) 2in x 8in, 12ft wooden beams, remove and replace fifty-five (55) 2in x 8in, 12ft wooden stringers, remove and replace twenty-two (22) 2in x 8in, 12ft wooden crossmembers and remove and replace one (1) 6in x 12ft support pile. Hardware: The Contractor shall use galvanized joist hangers, hurricane clips, bolts, screws, nails and any other associated hardware. Soil: The Contractor shall remove any existing and associated debris from the dock area, clean where land has eroded and use approximately 137CY of unclassified fill to backfill the 137ft long x 9ft wide x 3ft deep area.

Division 35 -

Waterway and Marine Construction, Common Work Results for Waterway and Marine Construction, Waterway and Marine Construction and Equipment, Marine Construction and Equipment.