Crooked Creek WRF - Building & Site Improvements

Install modular office building, free standing pre-engineered metal storage building and site work specified. Bids will be received for a single prime. Bids shall be on a lump sum or basis with Alternates listed separately. Refer to the Instructions to Bidders and Supplemental Instructions to Bidders for bidding procedures and requirements. Prospective bidders may examine the Bidding Documents at the Union County Procurement Department at 500 North Main Street, Suite 709, Monroe, NC 28112 on Monday through Fridays between the hours of 8:00m and 5:00pm, and may obtain copies of the Bidding Documents from the Issuing Office as described below. Issuing Office: Bidding Documents consisting of Contract Drawings and Project Manuals along with any Addendums may be obtained by visiting the bidding portal at Moseley Architects, website. In order for Moseley Architects to maintain an accurate list of planholders, each General Contractor (GC) shall forward and complete the following required steps: 1. Submit the following information to Moseley Architects: ATTN: Betty Godwin (bgodwin@moseleyarchitects.com) Partial sets of Bidding Documents will not be available from the Issuing Office. Neither Owner nor Engineer will be responsible for full or partial sets of Bidding Documents, including Addenda if any, obtained from sources other than the Issuing Office. Bidders are required to provide a non-collusion affidavit, as set forth in the bidding documents. As provided by statue, a deposit of cash, a cashier's check, a certified check on some bank or | trust company insured by the Federal Deposit Insurance Company, or a bid bond executed by a corporate surety licensed under the laws of North Carolina to execute such bonds in the amount of 5% of the bid must accompany each bid. The payee shall be "Union County". Said deposit shall guarantee that the Agreement will be entered into by successful bidder if award is made. Such deposit may be held by Union County until the successful bidder has executed and delivered all required Contract Documents to Union County. Bidders should note the provisions of the Supplementary instruction to bidders contained in the Bid Documents regarding minority participation. Union County encourages good faith effort outreach as described in the Union County MBE and Small business Outreach Plan. Compliance with Union County Minority and Small Business Guidelines and Outreach Plan goals apply. Bidders shall submit a completed identification of Minority Participation form and either an Affidavit A or Affidavit B, as applicable along with their Bid. The Owner reserves the right to reject any or all bids, including without limitation, nonconforming, nonresponsive, unbalanced, or conditional Bids. Owner further reserve the right to reject the Bid and Bidder whom they find, after reasonable inquiry and evaluation, to not be responsible. Owner may also reject the Bid and Bidder if the Owner believes that it would not be in the best interest of the Project to make an award to that Bidder. Owner also reserves the right to waive all informalities and technicalities not involving price, time, or changes in the Work and to negotiate, as allowed by law, contract terms with the Successful Bidder. Question Deadline 05/03/2023 at 5:00 PM ET All questions about the meaning or intent of the Bidding Documents are to be submitted in writing via e-mail to the Procurement contact person listed on the cover page (vicky.watts@unioncountync.gov).

1 Story Above Grade, 1,306 SF.

Division 02 -	Existing Conditions, Subsurface Investigation.
Division 03 -	Concrete, Concrete Forming and Accessories, Cast-in-Place Concrete, Precast Concrete.
Division 04 -	Masonry, Unit Masonry.
Division 05 -	Metals, Structural Metal Framing, Metal Fabrications.
Division 06 -	Wood, Plastics, and Composites, Rough Carpentry.
Division 07 -	Thermal and Moisture Protection, Dampproofing and Waterproofing, Thermal Protection.
Division 08 -	Openings, Doors and Frames, Metal Doors and Frames, Entrances, Storefronts, and Curtain Walls, Windows, Hardware, Door Hardware.
Division 09 -	Finishes, Flooring, Painting and Coating.
Division 10 -	Specialties, Signage, Compartments and Cubicles, Emergency Aid Specialties, Fire Protection Specialties, Storage Assemblies, Flagpoles.
Division 11 -	Equipment, Parking Control Equipment, Laboratory Equipment.
Division 14 -	Conveying Equipment.
Division 21 -	Fire Suppression, Fire-Extinguishing Systems.
Division 22 -	Plumbing, Instrumentation and Control for Plumbing, Plumbing Piping, Plumbing Equipment, Plumbing Fixtures.
Division 23 -	Heating, Ventilating, and Air Conditioning (HVAC), Instrumentation and Control for HVAC, HVAC Air Distribution.
Division 26 -	Electrical, Instrumentation and Control for Electrical Systems, Lighting, Interior Lighting, Emergency Lighting, Exit Signs, Exterior Lighting.
Division 27 -	Communications, Structured Cabling, Data Communications, Voice Communications, Distributed Audio-Video Communications Systems.
Division 28 -	Electronic Safety and Security, Electronic Access Control and Intrusion Detection, Access Control, Intrusion Detection, Electronic Surveillance, Video Surveillance, Electronic Detection and Alarm, Fire Detection and Alarm.
Division 31 -	Earthwork, Earthwork Methods.
Division 32 -	Exterior Improvements, Flexible Paving, Rigid Paving, Curbs, Gutters, Sidewalks, and Driveways, Fences and Gates, Turf and Grasses.
Division 33 -	Utilities, Water Utilities, Storm Drainage Utilities, Electrical Utilities, Communications Utilities.
Division 44 -	Pollution and Waste Control Equipment, Common Work Results for Pollution and Waste Control Equipment, Air Pollution Control, Noise Pollution Control, Odor Control, Water Pollution Control Equipment, Solid Waste Control and Reuse, Waste Thermal Processing Equipment, Fluidized Bed Combustion Equipment, Rotary Kiln Incinerators, Pyrolysis Equipment, Hazardous Waste and Medical Waste Incinerators, Heat Recovery Equipment for Waste Thermal Processing, Synthesis Gas Cleanup and Handling Equipment.