Electrical Improvements to Lift Station E5

• Replace 400 amp main breaker and enclosure with new 400 amp main breaker with Stainless Steel enclosure. • Replace wire from load side of main breaker to transfer switch. • Replace 400 amp transfer switch enclosure with new 400 amp transfer switch with Stainless Steel enclosure. • Replace wire from transfer switch to MDP. • Add 1 new 4x4 concrete post. • Add Stainless Steel unistrut for VFD’s. • Install three VFD’s. • VFD’s will be supplies by the City of Clermont. • Install raceway from MDP to three VFD’s. • Install raceways underground from VFD’s to new 24x24x20 Hinged Stainless Steel J box. • Install new 24x24x10 Hinged Stainless Steel J box with backplane and tie into existing 24x24 PVC J box. • Install three terminal blocks in new 24x24x10 Stainless Steel J box to accommodate pump cable leads. • Install new Myers hub on all side penetrations on equipment. • Replace old unistrut with new Stainless Steel unistrut. • Use all Stainless Steel hardware. • Remove concrete slab for blower. • Must provide backup 200 KW generator while work is being performed. • Must coordinate with electric energy company before work is being performed. • Pull all necessary permits and arrange for inspections as required. • Include signed sealed drawing if needed for the permitting process. • Post all applicable permits at job site. • Restore gravel to existing condition. • Provide testing and training to city employees. • Warranty shall be one (1) yea parts and labor.

Division 26 -

Electrical.