Replacement of Fuel/Turbine Pumps

1. Replacement of two (2) Submersible Turbine Pumps (STP). 2. Replacement of two (2) fuel dispensers: (1) diesel and (1) unleaded. 3. Conduct an on-site meeting to discuss safety procedures and scope of work. 4. Provided certified electrician will remove power from all electrical associated with existing STPs in a lock-out/tag-out procedure. 5. Disconnect all product piping associated with existing STPs. 6. Remove (1) existing diesel STP and dispose of in accordance with State and Local Regulations. 7. Requires forklift to remove STP from tanks, removal quote includes using Canon City's furnished Forklit. 8. Remove (1) existing unleaded STP and dispose of in accordance with State and Local Regulations. 9. Install (1) new F.E. Petro 3/4-HP fixed speed STP and controller for diesel. 10. Install (1) new F.E. Petro 3/4-HP fixed speed STP and controller for unleaded. 11. Provided certified electrician will re-install power onto each STP and startup. 12. Test each STP to ensure proper operation. 13. Cleanup jobsite and dispose of refuse materials.

Division 02 -	Existing Conditions, Subsurface Investigation.
Division 03 -	Concrete, Concrete Reinforcing, Cast-in-Place Concrete.
Division 05 -	Metals, Structural Metal Framing, Metal Decking.
Division 23 -	Heating, Ventilating, and Air Conditioning (HVAC), Facility Fuel Piping, Facility Fuel-Storage Tanks.
Division 31 -	Earthwork, Clearing and Grubbing, Grading.
Division 32 -	Exterior Improvements, Fences and Gates.
Division 33 -	Utilities, Storm Drainage Utilities.