RFP D/B - Instrumentation and Control System Replacement at St. Aubin, Seven Mile, and Lieb CSO Facilities

The intent of this project is to replace, design, demo, furnish, and install a complete Process Control System (PCS), replacement of all field devices at the above facilities and their associated remote sites as indicated within the contract documents Key Completion Times; Liquidated Damages", of the Agreement. Additionally, Contractor shall have the following minimum qualifications: 1. Contractor shall provide a licensed, professional engineer in the State of Michigan with at least ten (10) years' electrical, instrumentation and controls system engineering experience with Emerson Ovation or Rockwell FTView/Allen Bradley PLC systems and shall be responsible for the design of theProject and the Work. 2. Contractor's Project Manager and construction superintendent shall have at least ten (10) years' experience in project management and at least ten (10) years' experience in construction superintendence on municipal or industrial facilities, specializing in water/wastewater instrument and control system improvements projects. 3. Contractor and its system integrator (SI) shall each have completed at least three (3) design-build water/wastewater instrumentation and control projects in the past three (3) years. 4. Contractor's Instrument and Controls System Integrator: A. The SI must provide proof of successful completion of previous projects over the prior three (3) years, at minimum, and shall be subject to one or more audits, at Owner's discretion, before, during, or after the Project. B. The SI shall supply examples of and references from at least three (3) similar projects that it has successfully completed within the past five (5) years involving the following communications networks: 1) Modbus; 2) Ethernet; and/or 3) Radio/Cellular Modem/4G. C. The SI shall supply examples and references from at least three (3) similar projects that it has successfully completed within the past five (5) years involving each of the following hardware and software (software versions to be the current version at the time the work was performed): 1) Emerson Ovation System; 2) Rockwell ControlLogix PLC's and Factory Talk; 3) Rotork - Pak-scan; 4) Emerson Ovation ROS/OIT; and/or 5) PanelView Plus 7. D. The SI shall provide at least three (3) project references where the SI converted standard graphics to high performance graphics, with a minimum of 75 full-size graphic screens. E. The SI shall provide at least three (3) projects references where they provided end point cybersecurity protection to all servers and HMI at the project facility. The SI shall have provided end point security which included patch management, anti-virus, application control, device control, network detection, system back-up and recovery, security incident and event management and vulnerability assessment. F. The SI shall have an office or location, staffed with competent engineers that shall perform the Work, within 100 miles of the Project site. G. The SI shall have ISO 9001 certification. If the SI does not have this certification, then they shall be subject to a quality management audit by Owner or Owner's representative. H. The SI shall supply detailed resumes and past work experience for the office and field staff that shall be assigned to the Work. Because of the highly technical and skilled nature of the Work, Owner shall retain the right of individual approval and removal of any SI staff. Questions Due Date: Nov 30th 2021, 12:00 PM EST Confirmed Shortlist

Division 02 -	Existing Conditions, Subsurface Investigation.
Division 03 -	Concrete, Precast Concrete.
Division 04 -	Masonry, Unit Masonry.
Division 05 -	Metals, Structural Metal Framing, Metal Fabrications.
Division 06 -	Wood, Plastics, and Composites, Rough Carpentry.
Division 07 -	Thermal and Moisture Protection, Dampproofing and Waterproofing, Thermal Protection.
Division 08 -	Openings, Doors and Frames, Windows, Hardware.
Division 09 -	Finishes, Painting and Coating.
Division 10 -	Specialties, Signage, Compartments and Cubicles, Emergency Aid Specialties, Fire Protection Specialties, Storage Assemblies.
Division 11 -	Equipment, Laboratory Equipment.
Division 14 -	Conveying Equipment.
Division 21 -	Fire Suppression, Fire-Extinguishing Systems.
Division 22 -	Plumbing, Instrumentation and Control for Plumbing, Plumbing Piping, Plumbing Equipment, Plumbing Fixtures.
Division 23 -	Heating, Ventilating, and Air Conditioning (HVAC), Instrumentation and Control for HVAC, HVAC Air Distribution.
Division 26 -	Electrical, Instrumentation and Control for Electrical Systems, Interior Lighting, Emergency Lighting, Exit Signs, Exterior Lighting.
Division 27 -	Communications, Structured Cabling, Data Communications, Voice Communications, Distributed Audio-Video Communications Systems.
Division 28 -	Electronic Safety and Security, Electronic Access Control and Intrusion Detection, Access Control, Intrusion Detection, Electronic Surveillance, Electronic Detection and Alarm.
Division 31 -	Earthwork, Earthwork Methods.
Division 32 -	Exterior Improvements, Flexible Paving, Rigid Paving, Curbs, Gutters, Sidewalks, and Driveways, Fences and Gates, Turf and Grasses.
Division 33 -	Utilities, Instrumentation and Control for Utilities, Water Utilities, Water Utility Distribution Piping, Water Utility Distribution Equipment, Disinfecting of Water Utility Distribution, Water Utility Storage Tanks, Storm Drainage Utilities, Electrical Utilities, Communications Utilities.
Division 44 -	Pollution and Waste Control Equipment, Common Work Results for Pollution and Waste Control Equipment, Air Pollution Control, Noise Pollution Control, Odor Control, Water Pollution Control Equipment, Solid Waste Control and Reuse, Waste Thermal Processing Equipment, Fluidized Bed Combustion Equipment, Rotary Kiln Incinerators, Pyrolysis Equipment, Hazardous Waste and Medical Waste Incinerators, Heat Recovery Equipment for Waste Thermal Processing, Synthesis Gas Cleanup and Handling Equipment.