FY20 Savannah Inner Harbor Maintenance Dredging

Work may will include but not limited to the following: Contractor shall furnish all plant, labor, equipment, special equipment and material to fulfill the requirement of this Contract. Work has been traditionally performed with a hydraulic cutter-head dredge and the duration is expected to be one year from Notice to Proceed. Up to six million cubic yards of maintenance material is expected to be removed from the inner harbor. The work is located in the deep draft Savannah Harbor navigation project in Georgia. The Savannah Harbor project is located in Savannah, Georgia (GA) on the border of Georgia and South Carolina (SC) in Chatham County. The Savannah Inner Harbor channel is 42 ft. deep MLLW and 500 ft. wide to the upper end of Kings Island Turning Basin: 36 ft. deep MLLW and 400 ft. wide to the upper end of Argyle Island Turning Basin; and 30 ft. deep MLLW and 200 ft. wide to the upper limit of the project. Savannah Harbor’s Kings Island Turning Basin (KITB) is the primary turning basin for large civilian and military ships, lying adjacent to the Georgia Ports Authority docks. KITB requires dredging twice a year to allow the loaded ships to freely turn when using the port. Approximately 1.6 million cubic yards of maintenance material is removed from the KITB annually.

Division 35 -

Waterway and Marine Construction, Waterway and Marine Construction and Equipment, Dredging.