Roofing, Soffit Repair and Electrical - 1809 7th Street

The bidder shall submit a project plan using the design standards below that is in compliance with all applicable HUD, EPA, and State of Illinois regulations as well as all local building and zoning codes. The plan must include a clear project timeline and budget with line item costs. The contractor shall act as the general contractor for the project using subcontractors as required. Subcontractors that will be required should be clearly identified in the project plan. This project includes three parts. Part one is remove existing three-tab shingles down to roof sheathing. Inspect sheathing for water damage, roof rot, or other protentional problems. Replace as needed. If it becomes a complete re-sheet then a change order must be filled out and approved by the construction officer. Install Ice and snow guard in valleys and perimeter of bottom edge of roof lines. Install water barrier over the remaining sheathing. Replace turtle style roof vents with new units. Install new plumbing boots, flue flashing, and boot for the electrical mast. Install 30-year architectural shingles (Owen Corning's) preferred. Part two secure the soffit and fascia on the front of home, install new where the few pieces are missing. Part three remove electrical outlet and light on the front porch. Install new inexpensive LED exterior porch light with the original electrical opening. Add a GFCI all weather box and receptacle to the front door per code.

Division 07 -	Thermal and Moisture Protection, Dampproofing and Waterproofing, Thermal Protection.
Division 09 -	Finishes.
Division 26 -	Electrical.