North Carolina Wildlife Resources Commission Training Facility

**As of April 21, 2023, this project has not yet been awarded. A timeline for award has not yet been established.** North Carolina Wildlife Resources Commission Training Facility. Bids will be received for single prime contract. All proposals shall be lump sum. The project generally consists of a Training Facility that contains of a total of 3 stories and 21,800sf. One single story wing will consist of classroom, physical training space, and Instructor office space and another 3 story wing will consist of a trainee / instructor dormitory and lounge space. Type IIB construction with R-2 and B occupancies. Construction includes Brick Veneer, Fiber Cement Panel Veneer, and Manufactured Stone Veneer with metal stud back-up. Primary structure to be steel frame and roof to be sloped with asphalt shingles. Responses to any questions/clarifications will be in the form of addenda if required. The last day for questions/clarification shall by the end of the day at 5:00pm on Friday March 10th , 2023. Only Bidders or entities who obtain Bid Documents through Moseley Architects via the electronic process above will be considered Planholders. All others who obtain electronic Bid Documents or hard/paper Bid Documents through other means, including Plan Rooms, other Contractors, Owner, or third-party websites (ConstructConnect, Dodge, iSqFt., etc) are not considered Planholders. Only Planholders will be notified of Addenda. NOTE: The bidder shall include with the bid proposal the form Identification of Minority Business Participation identifying the minority business participation it will use on the project and shall include either Affidavit A or Affidavit B as applicable. Forms and instructions are included within the Proposal Form in the bid documents. Failure to complete these forms is grounds for rejection of the bid. (GS143-128.2c Effective 1/1/2002.) All contractors are hereby notified that they must have proper license as required under the state laws governing their respective trades. General contractors are notified that Chapter 87, Article 1, General Statutes of North Carolina, will be observed in receiving and awarding general contracts. General contractors submitting bids on this project must have license classification for Building Contractor. Each proposal shall be accompanied by a cash deposit or a certified check drawn on some bank or trust company, insured by the Federal Deposit Insurance Corporation, of an amount equal to not less than five percent (5%) of the proposal, or in lieu thereof a bidder may offer a bid bond of five percent (5%) of the bid executed by a surety company licensed under the laws of North Carolina to execute the contract in accordance with the bid bond. Said deposit shall be retained by the owner as liquidated damages in event of failure of the successful bidder to execute the contract within ten days after the award or to give satisfactory surety as required by law. Payment will be made based on ninety-five percent (95%) of monthly estimates and final payment made upon completion and acceptance of work. No bid may be withdrawn after the scheduled closing time for the receipt of bids for a period of 30 days. The owner reserves the right to reject any or all bids and to waive informalities. A performance bond and a payment bond will be required for one hundred percent (100%) of the contract price.

Division 03 -	Concrete, Concrete Forming, Cast-in-Place Concrete.
Division 04 -	Masonry, Unit Masonry.
Division 05 -	Metals, Structural Metal Framing.
Division 06 -	Wood, Plastics, and Composites, Rough Carpentry, Finish Carpentry.
Division 07 -	Thermal and Moisture Protection, Dampproofing and Waterproofing, Thermal Protection, Weather Barriers.
Division 08 -	Openings, Metal Doors and Frames, Wood Doors, Plastic Doors, Specialty Doors and Frames, Panel Doors, Multi-Leaf Vertical Lift Doors.
Division 09 -	Finishes, Plaster and Gypsum Board, Tiling, Flooring, Acoustic Treatment, Painting, High-Performance Coatings.
Division 10 -	Specialties, Signage, Compartments and Cubicles, Toilet Compartments, Shower and Dressing Compartments, Toilet, Bath, and Laundry Accessories, Emergency Aid Specialties, Fire Protection Specialties, Lockers, Wardrobe and Closet Specialties, Flagpoles, Flags and Banners.
Division 11 -	Equipment, Unit Kitchens.
Division 12 -	Furnishings, Countertops, Rugs and Mats.
Division 14 -	Conveying Equipment, Slide Pole Systems, Firehouse Slide Poles.
Division 21 -	Fire Suppression, Facility Fire-Suppression Water-Service Piping, Fire-Department Connections, Fire Pumps.
Division 22 -	Plumbing, Instrumentation and Control for Plumbing, Facility Water Distribution, Facility Storm Drainage, Plumbing Equipment, Plumbing Fixtures, Emergency Plumbing Fixtures, Drinking Fountains and Water Coolers.
Division 23 -	Heating, Ventilating, and Air Conditioning (HVAC), Instrumentation and Control for HVAC, HVAC Piping and Pumps, HVAC Air Distribution.
Division 26 -	Electrical, Power Distribution Units, Interior Lighting, Emergency Lighting, Exit Signs, Exterior Lighting.
Division 27 -	Communications, Structured Cabling, Call Management, Distributed Audio-Video Communications Systems.
Division 28 -	Electronic Safety and Security, Electronic Detection and Alarm, Fire Detection and Alarm.
Division 31 -	Earthwork, Clearing and Grubbing, Grading, Soil Treatment.
Division 32 -	Exterior Improvements, Bases, Ballasts, and Paving, Flexible Paving, Asphalt Paving, Rigid Paving, Concrete Paving, Curbs, Gutters, Sidewalks, and Driveways.
Division 33 -	Utilities, Water Utilities, Sanitary Sewerage Utilities, Storm Drainage Utilities.