Water and Ice Dispenser

Install 8 combination Icemaker and Hot/Cold water dispensers in 8 different locations throughout B185 facility. This requirement will have multiple entities involved to accomplish the work outlined in accordance with the statement of work (SOW). A Combination Ice Maker and Hot/ Cold Water Dispenser Shall utilize the existing 115-120V outlets currently in place and the water supply currently in place and the drain line currently in place. The unit must be sized to fit in a space with the demotions of 29" wide by 60" High By 23" Deep. The unit must have a filtration process that includes a 3-stage system. This will include a Dual Reverse Osmosis, Pre-Carbon, Mineral Carbon and Sediment. This filtration system must be enclosed inside the unit. The unit must dispense Hot water from a .6 gallon reservoir and cold water from a 2 gallon reservoir with a 1 gallon flow rate per minute. The unit must produce 30lbs to 40lbs of ice per day. The unit must have touchless operation system. Contractor shall be responsible for providing all the tools necessary to install the machines. Contractor shall be responsible for all cleanup and the disposal of any waste generated through this CBR pertaining to the installation. A pre-proposal site visit will be conducted 02:00PM, 21 August 2023 at 557th Weather Wing, 105 Nelson Dr, Offutt AFB, NE 68113. if you intend on attending the site vist please fill out the attached VENDOR NCIC SCREENING & PASS REQUEST SPREADSHEET attached and return to craig.johnson.37@us.af.mil by 17 August 2023. Technical questions are due not later than 10:00AM CDT on 25 August 2023. For questions please contact the contract administrator SrA Craig Johnson at 402-232-1456 or via email at craig.johnson.37@us.af.mil or the Contracting Officer, TSgt Austin Palrang, at 402- 232-2482 or via email at austin.palrang@us.af.mil.

Division 23 -

Heating, Ventilating, and Air Conditioning (HVAC), Instrumentation and Control for HVAC, HVAC Air Distribution, Central HVAC Equipment.