Well 1A Replacement

The work under the project includes, but is not limited to, the installation of a new well treatment facility (Well No. 1A-R), complete, inclusive of all components as depicted herein the Construction Documents. The scope of work consists of all structural, mechanical, electrical, and related utility appurtenances, for the installation of the new well treatment facility. The treatment facility comprises all well process piping appurtenances (including the weak acid ion exchange system, aeration system, vertical turbine well pump, and vertical turbine clear well pump), yard piping, site improvements, electrical improvements (including generator), natural gas service improvements, sewer/storm improvements, and related appurtenances. The contractor is responsible for providing all labor, supervision, trade skills, materials, and equipment required for this project as described in the Construction Documents. The Contract will allow 365 consecutive calendar days for substantial completion and 425 consecutive calendar days for Final Completion of the work from the issuance of the notice to proceed. A certified check or cashiers check made payable to the Township of Parsippany-Troy Hills, or a duly executed bid bond in the amount of 10% of each bid, but in no case in excess of $20,000.00, must be deposited by the bidder together with a Certificate of Surety evidencing that he can obtain the required Performance Bond and Payment Bond in the amount of one hundred percent (100%) of the total amount of the contract.. The successful Bidder will be required to deliver to the Owner an executed Performance Bond of a responsible indemnity company authorized to do business in the State of New Jersey. In lieu of a Certificate of Surety, the bidder may submit, at the bid opening, a certified check or cashiers check in the amount of one hundred percent (100%) of the total amount of the bid. Bidders are required to comply with requirements of N.J.S.A. 10:5-31 et seq and N.J.A.C. 17:27. In addition bidders must also comply with the following New Jersey Statutes: N.J.S.A. 10:5-31 et seq. and N.J.A.C. 17:27 Affirmative Action Section 1 of P.L.1977, c.33 (N.J.S.A. C.52:25-24.2) Statement of Ownership N.J.S.A. 40A:11-18 American Goods and Products to be Used Where Possible Section 21 of P.L.1971, c.198 (N.J.S.A. C.40A:11-21) Guarantee to be Furnished with Bid Section 22 of P.L.1971, c.198 (N.J.S.A. C.40A:11-22) Surety Company Certificate Section 16 of P.L.1971, c.198 (N.J.S.A. C.40A:11-16) Listing of Subcontractors Section 1 of P.L.2001, c.134 (N.J.S.A. C.52:32-44) Business Registration N.J.S.A. 34:11-56.25 et seq N.J. Prevailing Wage Act All Bidders and their Subcontractors must comply with the requirements of the New Jersey Public Works Contractor Registration Act, N.J.S.A. 34:11-56.48 et seq. Bid proposals must be placed in sealed envelopes addressed to the Office of Purchasing, Township of Parsippany-Troy Hills, 1001 Parsippany Boulevard, Parsippany, New Jersey 07054 and marked plainly on the outside with the bid description and the name and address of the bidder marked clearly on the outside of the envelope. The Township of Parsippany-Troy Hills reserves the right to reject any and all bids or to waive any minor informalities or irregularities in the proposal received and to accept the bid of the lowest responsible bidder as required by N.J.S.A. 40A-11-4. The Township further reserves the right to consider all bids for sixty (60) days after the bid opening before awarding a contract. Job #21-172

Division 02 -	Existing Conditions, Subsurface Investigation.
Division 03 -	Concrete, Precast Concrete.
Division 04 -	Masonry, Unit Masonry.
Division 05 -	Metals, Structural Metal Framing, Metal Fabrications.
Division 06 -	Wood, Plastics, and Composites, Rough Carpentry.
Division 07 -	Thermal and Moisture Protection, Dampproofing and Waterproofing, Thermal Protection.
Division 08 -	Openings, Doors and Frames, Windows, Hardware.
Division 09 -	Finishes, Painting and Coating.
Division 10 -	Specialties, Signage, Compartments and Cubicles, Toilet, Bath, and Laundry Accessories, Emergency Aid Specialties, Fire Protection Specialties, Fire Extinguishers, Storage Specialties, Storage Assemblies.
Division 11 -	Equipment, Laboratory Equipment.
Division 12 -	Furnishings.
Division 14 -	Conveying Equipment, Scaffolding.
Division 21 -	Fire Suppression, Fire-Extinguishing Systems.
Division 22 -	Plumbing, Instrumentation and Control for Plumbing, Plumbing Piping, Plumbing Equipment, Plumbing Fixtures.
Division 23 -	Heating, Ventilating, and Air Conditioning (HVAC), Instrumentation and Control for HVAC, HVAC Air Distribution.
Division 26 -	Electrical, Instrumentation and Control for Electrical Systems, Interior Lighting, Emergency Lighting, Exit Signs, Exterior Lighting.
Division 27 -	Communications, Structured Cabling, Data Communications, Voice Communications, Audio-Video Systems, Distributed Audio-Video Communications Systems.
Division 28 -	Electronic Safety and Security, Electronic Access Control and Intrusion Detection, Access Control, Intrusion Detection, Electronic Surveillance, Electronic Detection and Alarm.
Division 31 -	Earthwork, Earthwork Methods.
Division 32 -	Exterior Improvements, Flexible Paving, Rigid Paving, Curbs, Gutters, Sidewalks, and Driveways, Fences and Gates, Turf and Grasses.
Division 33 -	Utilities, Common Work Results for Utilities, Instrumentation and Control for Utilities, Water Utilities, Water Utility Distribution Piping, Water Utility Distribution Equipment, Water Utility Pumping Stations, Disinfecting of Water Utility Distribution, Water Utility Storage Tanks, Wastewater Utility Pumping Stations, Sanitary Utility Sewerage Force Mains, Storm Drainage Utilities, Electrical Utilities, Communications Utilities.
Division 40 -	Process Integration, Water Process Piping.
Division 44 -	Pollution and Waste Control Equipment, Common Work Results for Pollution and Waste Control Equipment, Air Pollution Control, Noise Pollution Control, Odor Control, Water Pollution Control Equipment, Solid Waste Control and Reuse, Waste Thermal Processing Equipment, Fluidized Bed Combustion Equipment, Rotary Kiln Incinerators, Pyrolysis Equipment, Hazardous Waste and Medical Waste Incinerators, Heat Recovery Equipment for Waste Thermal Processing, Synthesis Gas Cleanup and Handling Equipment.
Division 45 -	Industry-Specific Manufacturing Equipment.
Division 46 -	Water and Wastewater Equipment.