Capps Ferry Lift Station and Force Main

The work to be performed shall include the Installation of approximately 17,000 linear feet of force main and building and start-up of a lift station, including generator and odor control system, as shown on the plans prepared by Hughes-Ray Company, dated November 18, 2020. The force main consists of approximately 8,000 feet of 12" and 9,000 feet of 16" Tnemec 431 lined ductile iron pipe, including approximately 1,000 feet of bored casing pipe. The Authority will provide all 12-inch and 16-inch ductile iron pipe for the Project. Additionally, approximately 1,100 feet of 2' PVC waterline will be installed as part of the Project. Portions of the Project will be on easements that will require clearing while other portions are on existing right of way.

Division 03 -	Concrete.
Division 04 -	Masonry.
Division 05 -	Metals.
Division 06 -	Wood, Plastics, and Composites.
Division 07 -	Thermal and Moisture Protection.
Division 08 -	Openings.
Division 09 -	Finishes.
Division 10 -	Specialties, Signage, Toilet, Bath, and Laundry Accessories, Fire Protection Specialties, Fire Extinguishers, Storage Specialties.
Division 11 -	Equipment.
Division 12 -	Furnishings.
Division 14 -	Conveying Equipment, Scaffolding.
Division 21 -	Fire Suppression.
Division 22 -	Plumbing.
Division 23 -	Heating, Ventilating, and Air Conditioning (HVAC).
Division 26 -	Electrical.
Division 27 -	Communications, Data Communications, Voice Communications, Audio-Video Systems.
Division 28 -	Electronic Safety and Security.
Division 31 -	Earthwork.
Division 32 -	Exterior Improvements, Fences and Gates, Turf and Grasses.
Division 33 -	Utilities, Common Work Results for Utilities, Instrumentation and Control for Utilities, Water Utilities, Water Utility Distribution Piping, Water Utility Distribution Equipment, Water Utility Pumping Stations, Disinfecting of Water Utility Distribution, Water Utility Storage Tanks, Wastewater Utility Pumping Stations, Sanitary Utility Sewerage Force Mains.
Division 40 -	Process Integration, Water Process Piping.
Division 45 -	Industry-Specific Manufacturing Equipment.
Division 46 -	Water and Wastewater Equipment.