Construction Journal Try for free >
Similar Projects
Air Handler Maintenance
Bidding
Columbus, OH
HVAC Supplies
Bidding
Columbus, OH
Utility Monitoring and Control Systems
Post-Bid
Less than $2,100,000,000 est. value
Emergency Power & HVAC, DFAS
Post-Bid
$500,000 to $1,000,000 est. value
Columbus, OH
Morehouse Pavilion AHU1 Replacement - Design-Build
Results
$1,216,000 est. value
Columbus, OH
HVAC Replacements Phase 2 - CM at Risk Contract
Results
Less than $7,216,087 est. value
Columbus, OH
HVAC Controls and Repair Parts
Bidding
Columbus, OH
DPU/Watershed/HVAC Service
Post-Bid
Less than $10,000 est. value
Columbus, OH
HVAC Repair and Replacements Project
Results
Less than $7,275,000 est. value
Columbus, OH
HVAC Repairs
Bidding
Columbus, OH
PROJECT NLZG182004; Replace AHU's at Building 883
Post-Bid
$100,000 to $250,000 est. value
Columbus, OH 43217
Cooling Tower Replacement
Results
Less than $134,894 est. value
Upper Arlington, OH
Public Service Facilities Mechanical Repair
Post-Bid
Columbus, OH 43215
Design-Build Services - Renovation of HVAC Systems
Results
Less than $101,213 est. value
Columbus, OH
HVAC Filters
Post-Bid
Columbus, OH 43215

HVAC Construction Project Lead, Columbus, OH   (Franklin County)

Share
Reported 07/27/2019 12:00 AM
Project Title

Preventative Maintenance Rooftop Units

Physical Address View project details and contacts
City, State (County) Columbus, OH   (Franklin County)
Category(s) Single Trades
Sub-Category(s) HVAC
Contracting Method Competitive Bids.
Project Status Request for Quotations
Bids Due View project details and contacts
Estimated Value
Plans Available from Municipal Agency
Owner View project details and contacts
Architect View project details and contacts
Description Location: 3700 South High St Columbus Ohio 43207. Rooftop HVAC Unit 1. Filters, complete filter change 2 times a year. 2. Fresh air damper, Check for proper operation, adjust and lubricate bearings. 3. Return air dampers, Check for proper operation, adjust and lubricate bearings. 4. Exhaust air dampers, Check for proper operation, adjust and lubricate bearings. 5. Fans, Clean dirt, lubricate bearings, check for bearing wear, check drive couplings and tighten, check belts. Replace belts once a year, check alignment of shaft, check that fan blades are tight to shaft. 6. Supply fan, Inspect for proper rotation, check and lubricate motor. 7. Coils, clean condenser coils with coil cleaner and water once a year. Clean evaporator coil as needed.
Details
Division 23 - Heating, Ventilating, and Air Conditioning (HVAC), Instrumentation and Control for HVAC, HVAC Air Distribution, Central HVAC Equipment.
Bidder's List View project details and contacts
Prospective Bidders View project details and contacts
Project Documents
 Engineered Spec Sheet
 Architectural Plans
 Other Documents