Mayor's Office Roof Replacement

This Project Scope Consists of Replacing the Existing Shingle Roof, Including Walkway and Damaged Facia at the City of Hammond Mayors Office Located at 310 East Charles St. Hammond La. 70401. Size is Estimated 6,800 Square Feet, Acutal Measurements Responsibilty of Proposer. Estimated Budget $39,000.00 Performance Bond: The Contractor shall furnish and pay for a Performance Bond written by a company licensed to do business in Louisiana, and shall be countersigned by a person who is contracted with the surety company or bond issuer as an agent of the company or issuer, and who is licensed as an insurance agent in this state, and who is residing in this state, in an amount equal to the 100% contract amount. Normally, bid bonds will not be required on bids for materials, supplies, annual contracts or small labor contracts. If a bid bond is required, it will be specifically requested on the RFP form and included in the specifications. . The Work includes the provision of all labor, material, equipment, management, coordination, supervision and administration to complete the Work as outlined. B. The Contractor shall complete the following Work in a safe manner. The following outline of Work is noted by System. The Work includes, but is not limited to the following: 1. Completely remove existing asphalt shingles and accessories down to the existing plywood deck. Install new asphalt shingles including necessary accessories to receive the manufacturers warranties. Shingles shall be installed to meet IBC Code for the project's location. All trash and debris shall be legally and properly disposed of in a landfill. 2. Install new asphalt shingles and all required accessories. (Including but not limited to Underlayment, Ice and Water Shield, Hip and Ridge Shingle, Starter Shingle , Ventilation, and Sheet metal. NEW ROOFING SYSTEM DESCRIPTION a. Replace any rotten or missing plywood deck and fascia. Fascia is missing in a couple locations. b. Install synthetic underlayment and ice and water shield. c. Install new asphalt shingle system with manufacturer's Starter, Hip and Ridge, vent stack flashings, and Ridge Ventilation. d. Install new sheet metal including fascia, and copings.

6,800 SF.

Division 03 -	Concrete, Concrete Forming and Accessories, Cast-in-Place Concrete.
Division 04 -	Masonry, Unit Masonry.
Division 06 -	Wood, Plastics, and Composites, Rough Carpentry, Finish Carpentry, Millwork.
Division 07 -	Thermal and Moisture Protection, Dampproofing and Waterproofing, Thermal Protection, Weather Barriers.
Division 08 -	Openings, Doors and Frames, Entrances, Windows.
Division 09 -	Finishes, Plaster and Gypsum Board, Acoustical Ceilings, Flooring, Carpeting, Acoustic Treatment, Painting.
Division 12 -	Furnishings.
Division 21 -	Fire Suppression, Water-Based Fire-Suppression Systems, Fire-Extinguishing Systems.
Division 22 -	Plumbing, Instrumentation and Control for Plumbing, Plumbing Piping, Plumbing Equipment, Plumbing Fixtures, Drinking Fountains and Water Coolers.
Division 23 -	Heating, Ventilating, and Air Conditioning (HVAC), Instrumentation and Control for HVAC, HVAC Air Distribution, Central HVAC Equipment.
Division 26 -	Electrical, Power Distribution Units, Lighting, Interior Lighting, Emergency Lighting, Exit Signs, Exterior Lighting.
Division 27 -	Communications, Structured Cabling, Data Communications, Voice Communications.
Division 28 -	Electronic Safety and Security.
Division 31 -	Earthwork, Clearing and Grubbing, Grading, Soil Treatment.
Division 32 -	Exterior Improvements, Flexible Paving, Asphalt Paving, Rigid Paving, Concrete Paving, Curbs, Gutters, Sidewalks, and Driveways, Paving Specialties, Parking Bumpers, Pavement Markings, Fences and Gates, Irrigation, Planting.
Division 33 -	Utilities.