Truck Scale System Rebuild Project

The successful Contractor shall be required to complete, but not limited to the following work tasks; the removal of the existing inbound truck scale concrete platform and if required any other additional concrete foundation areas that may need rebuilt; along with all current electronic scale equipment and accessories. Then furnish and install (if required) any new concrete foundation areas and repair any and all existing foundation scale pit walls along with any other additional structural areas. Furnish and install new prefabricated concrete scale platform decking along with new load cells, indicators, surge voltage protection system and any and all related accessories required for full operation of the new truck scale system. The furnishing, construction, and installation of the new truck scale system shall be completed in conformity with the drawings, specifications, engineering data, instructions and recommendations of the equipment manufacturer. The Contractor will also be responsible for providing any and all rigging materials, cranes or other material handling equipment (as required) and personnel for the removal of the existing truck scale system and the installation of new truck scale system. The Contractor is responsible to ensure that the new truck scale system, its electronics and its additional accessories that are furnished are required to able to connect, inter phase with and be totally compatible for operation with the County’s current computers and truck scale software systems. The name of the software system is PC Scale. The Contractor is also responsible for obtaining operational certification for the new truck scale system through the PA Bureau of Weights and Measurements when placed into operation.

Division 03 -	Concrete, Cast-in-Place Concrete.
Division 41 -	Material Processing and Handling Equipment, Batching Equipment, Weigh Scales.