Buckley Readiness Center Room Conversion

Project Number- A22111.02, 2158 Buckley Readiness Center Room Conversion Estimated Bid Cost Range: $556,896 - $622,780 The Work includes the alterations to approximately 2,600 square feet of the existing 27,092 structure. The interior space was originally designed as a men's locker room and is relatively unfinished. The project will subdivide the space into six (6) new 'Team Rooms'. The work includes: 1. Limited CMU masonry and existing gas furnace demolition. 2. Construct new interior walls and install new hollow metal doors. 3. Fur and finish selected existing CMU walls. 4. Close off two (2) exterior doors. 5. Prepare existing concrete floor and finish with VCT. 6. Install new suspended lay-in tile ceiling 7. Install new electrical, telecom, and audio-visual improvements. 8. Install new variable refrigerant flow (VRF) HVAC systems. 9. Alterations to the existing automatic fire sprinkler system and fire alarm and detection system as required by the work. Alterations/extension to the existing fire protection systems is a deferred submittal and design is delegated to the bidder. To perform work on Camp Murray. The Bidder, if successful, and all associated subcontractor's employees, if any, shall provide all information required for background checks to meet installation access requirements to be accomplished by installation Provost Marshal Office. The successful Bidder's workforce must comply with all personal identity verification requirements as directed by the Department of Defense (DoD), Department of the Army (DA), The National Guard Bureau (NGB) and/or local policy. In response to the COVID- 19 global pandemic all contractors who attend the bid opening are encouraged to wear face masks and practice social distancing. Please direct questions regarding this project to A/E consultant representative Mr. Bill Ecker, KMB architects. Mr. Ecker may be reached directly by calling (360) 528-2769 or email BillEcker@KMBarchitects.com. Bidder Responsibility will be evaluated for this Project. In determining bidder responsibility, the Owner shall consider an overall accounting of the criteria set forth in "DIVISION 00 RESPONSIBILITY CRITERIA". Please direct questions regarding this subject to the office of the Architect, KMB architects, 906 Columbia St SW, Suite 400, Olympia, WA 98501, telephone (360) 352-8883. The State of Washington prevailing wage rates are applicable for this public works Project located in Pierce County. Bidders are responsible to verify and use the most recent prevailing wage rates. The "Effective Date" for this Project is the Bid Form due date above. The applicable prevailing wage rates may be found on the Department of Labor & Industries The Owner has Federal Funding or other special requirements for this Project. The Bidder will be required to comply with the "Division 00 Special Conditions" Section in the Specifications. Please direct questions regarding this subject to the office of the Architect, KMB architects, 906 Columbia St SW, Suite 400, Olympia, WA 98501, telephone (360) 352-8883. The successful Bidder is required to register and create an account in the DES Diversity Compliance program (B2Gnow) at portal . Voluntary numerical MWBE goals of 10% MBE, 6% WBE, 5% Washington Small Business, and 5% Veterans have been established for this project. Achievement of the goals is encouraged. The State reserves the right to accept or reject any or all bids and to waive informalities. *The value for this project is based on a financial range. The value is listed as the highest possible cost from the range provided by a stakeholder or official project document. Subdivide an existing unused locker room area into six (6) new finished Teams Meeting Rooms. Work includes limited demolition, masonry work, wall framing and finish, floor preparation and finish, electrical, telecom and mechanical improvements.

Division 03 -	Concrete, Cast-in-Place Concrete, Precast Concrete.
Division 04 -	Masonry, Unit Masonry.
Division 05 -	Metals, Structural Metal Framing.
Division 06 -	Wood, Plastics, and Composites, Rough Carpentry, Finish Carpentry, Architectural Woodwork.
Division 07 -	Thermal and Moisture Protection, Dampproofing and Waterproofing, Thermal Insulation, Weather Barriers.
Division 08 -	Openings, Metal Doors and Frames, Wood Doors, Plastic Doors, Specialty Doors and Frames, Entrances and Storefronts, Curtain Wall and Glazed Assemblies, Windows, Hardware.
Division 09 -	Finishes, Plaster and Gypsum Board, Tiling, Acoustical Ceilings, Flooring, Resilient Flooring, Carpeting, Acoustic Treatment, Painting.
Division 10 -	Specialties, Visual Display Units, Signage, Compartments and Cubicles, Toilet Compartments, Partitions, Fire Protection Specialties, Fire Protection Cabinets, Fire Extinguishers, Storage Assemblies, Flagpoles.
Division 12 -	Furnishings, Window Treatments, Casework, Office Furniture, Multiple Seating.
Division 21 -	Fire Suppression, Fire-Suppression Sprinkler Systems.
Division 22 -	Plumbing, Facility Water Distribution, Facility Sanitary Sewerage, Facility Storm Drainage, Plumbing Equipment, Plumbing Fixtures.
Division 23 -	Heating, Ventilating, and Air Conditioning (HVAC), Instrumentation and Control for HVAC, HVAC Piping and Pumps, HVAC Air Distribution.
Division 26 -	Electrical, Instrumentation and Control for Electrical Systems, Interior Lighting, Emergency Lighting, Exit Signs, Exterior Lighting.
Division 27 -	Communications, Structured Cabling, Data Communications, Voice Communications.
Division 28 -	Electronic Safety and Security, Electronic Access Control and Intrusion Detection, Fire Detection and Alarm.
Division 31 -	Earthwork, Site Clearing, Grading, Soil Treatment.
Division 32 -	Exterior Improvements, Bases, Ballasts, and Paving, Flexible Paving, Asphalt Paving, Rigid Paving, Concrete Paving, Curbs, Gutters, Sidewalks, and Driveways, Planting Irrigation, Turf and Grasses.
Division 33 -	Utilities, Water Utilities, Sanitary Sewerage Utilities, Storm Drainage Utilities.