Purchase of Parts and Installation of Stainless Steel Countertop

Installation of stainless steel countertop at HPD Lake Patrol, 113 Stillson, Huffman, Texas 77336. 1. Provide 14 gauge stainless steel kitchen countertops as per drawings. 2. Included are (1) sink that must be fully welded integral with countertop. Ink will be 30 inches wide and 18 inches from front to back and 8 inches deep each sink. 3. The sink will have a drain hole in the center for a standard type basket/strainer. 4. Contractor will provide a raised platform in center of sink for a three hole faucet. 5. Platform will be % inch high x 3 in wide x 12 inches long with three 1 inch holes for a standard faucet and fully welded integral with countertop. Platform is designed to help prevent water from seeping through under the faucet deck and into the cabinet below. 6. Countertop against wall and end of cabinet shall include a 3A inch x 4 inch back slash. 7. Also include a back slash from top of back slash to bottom of upper cabinet. Space from top of back splash to upper cabinet is approximately 21 inches. 8. Contractor will furnish and attach a % cdx plywood substrate for stainless steel to mount on. 9. Sink shall have a minimal of % inch flow to drain. 10.One counter top in EMS room 146 inches by 25 1/4 wide with 1 sink 22 inches wide by 16 inches front to back and 7 inches deep. 11. All necessary butt joints must have polished welded seams. No joints shall be visible. 12. The finish will be a milled finish

Division 05 -

Metals, Structural Metal Framing, Metal Joists, Metal Fabrications.