Similar Projects
Last Updated | 01/06/2020 01:36 PM |
Project Title | 100-120 Gallon Holding Tank |
Physical Address | View project details and contacts |
City, State (County) | Philadelphia, PA 19107 (Philadelphia County) |
Category(s) | Sewer and Water |
Sub-Category(s) | Storage/Water Tanks |
Contracting Method | Competitive Bids. |
Project Status | Results |
Bids Due | View project details and contacts |
Estimated Value | |
Plans Available from | |
Owner | View project details and contacts |
Architect | View project details and contacts |
Description | 1. From 100-120 gallon holding tank (up to 150 gallons is fine provided it meets dimensions specifications due to space constraints) 2. Water holding tank should be made of HDPE or some other type of heavy-duty plastic (preferable white) 3. Must have a top (either screw on or just regular overlapping top) 4. Must have a spigot at the bottom for water dispensing 5. Must have a metal or standard type of stand 6. Width needs to be between 28" and 30" (can be up to 32" but that's pushing it) 7. Height is contingent on volume, but in general anywhere from 40" to 48". Can be a little more or a little less to make up volume needs. 8. Volume indicators on the side of the tank are a bonus but not necessary |
||||||||||||||
Details |
|
||||||||||||||
Bidder's List | View project details and contacts | ||||||||||||||
Prospective Bidders | View project details and contacts | ||||||||||||||
Project Documents |
Engineered Spec Sheet Architectural Plans Other Documents |