Colorado Springs Airport IT Server Room Remodel

Scope of work for this contract includes the demolition and rehabilitation of the existing terminal building IT server room as defined within the IT Server Room Program design drawing set provided by the Airport. This work includes, but is not limited to the rehabilitation of ceilings, walls, flooring, lighting, finishes, electrical, HVAC, fire suppression system, fabrication and installation of listed IT server equipment (reference sheet T-02). This project also includes the requirement of the contractor to provide stamped drawings, permitting, removal of existing, and installation of the called out construction divisions (communications, fire alarm, and fire protection systems). Please note that the plan sheets provided on these disciplines are performance drawings to assist the awarded contractor with information and not intended for construction.

Division 02 -	Existing Conditions, Demolition, Selective Demolition, Selective Interior Demolition.
Division 06 -	Wood, Plastics, and Composites, Rough Carpentry, Finish Carpentry.
Division 07 -	Thermal and Moisture Protection, Dampproofing and Waterproofing, Thermal Protection.
Division 08 -	Openings, Doors and Frames, Windows.
Division 09 -	Finishes, Plaster and Gypsum Board, Ceilings, Flooring, Painting and Coating.
Division 21 -	Fire Suppression.
Division 22 -	Plumbing.
Division 23 -	Heating, Ventilating, and Air Conditioning (HVAC), Instrumentation and Control for HVAC, HVAC Air Distribution.
Division 26 -	Electrical, Lighting.