Maintenance Dredging of Flushing Bay and Creek, NY Federal Navigation Project

Contract Award Date: Aug 12, 2022 Contract Award Number: W912DS22C0015 Task/Delivery Order Number: Contractor Awarded Unique Entity ID: GRXJZ31K6LN9 Contractor Awarded Name: DONJON MARINE CO., INC. Contractor Awarded Address: Hillside, NJ 07205-2033 USA Base and All Options Value (Total Contract Value): $23970800.00 *Some or all of the documents for this project may be controlled unclassified information and property of the United States Government and if so we will not be obtaining them. Users must register with Beta.Sam in order to view and obtain controlled unclassified documents. The New York District of the U.S. Army Corps of Engineers (USACE) proposes to perform maintenance dredging of Flushing Bay and Creek, New York, Federal Navigation Project to a depth of -15 feet Mean Lower Low Water (MLLW) plus 2 feet of allowable over-depth. The proposed maintenance dredging would remove approximately 150,000 cubic yards (CY) of critical shoals from the Flushing Bay and Creek with subsequent placement at a suitable, state-permitted upland site(s). The dredged material from Flushing Bay and Creek consists of 1.0% gravel, 14.0% sand, 61.8% silt, and 23.2% clay. Due to restrictions in the New York State Department of Environmental Conservation Water Quality Certificate, the proposed work can only be performed utilizing a mechanical dredge with a closed clamshell environmental bucket. Additionally, multiple scows and tugboats will be needed to perform the work during the dredging, and transport operations. The dredged material would be required to meet all federal, state, and local criteria required by the government agencies having jurisdiction where the dredging and placement sites are located. The apparent low bidder shall, within 35 calendar days from the date the apparent low bidder is notified of being such, provide copies of all required permits and approvals for transportation, transfer, dewatering, processing, and final placement of dredged material, and shall submit evidence of such permits and approvals to the government. Bidders should consult the specifications for all submittal requirements. Once the contract is awarded, the contractor will be required to commence work within five (5) calendar days after the date of receipt of the notice to proceed and maintain an integrated production rate of at least 2,250 cubic yards per calendar day for the dredging and placement of material. The presence of dredging equipment in the channel will impact vessel traffic and it is necessary to maintain this production rate while minimizing the duration of this impact. The proposed work is anticipated to take place between September and November 2022. The work is estimated to cost between than $10,000,000 and $25,000,000.00. This is an unrestricted procurement. The method of contractor selection has not been determined at this time. *The value for this project is based on a financial range. The value is listed as the highest possible cost from the range provided by a stakeholder or official project document.

Division 35 -

Waterway and Marine Construction, Common Work Results for Waterway and Marine Construction, Waterway and Marine Construction and Equipment, Marine Construction and Equipment.