Continental Bridge Repairs

Bid Cancelled. This project includes the repair of both abutments of Continental Reservoir Bridge as indicated on the plans, specifications, and the following requirements. This work includes the excavation of both abutments, bringing abutment backwalls back to plumb, creating an underdrainage structure within the backfill of each abutment, adding dead-men timbers to both abutments and all four wingwalls. The bridge shall be reset to its original orientation. Work also includes armoring the bridge abutment backwalls, wingwalls, and banks with riprap, the addition of four Type 2 Object Markers, and the removal and disposal of non-compliant approach railings and work as indicated in the drawings and specifications. Upon completion of construction, the bridge shall be reset such that the final location of the bridge maintains the initial location of the bridge. Optional work that may be awarded includes the replacement of any unacceptable fill material subject to approval by CO and the replacement of any decayed/rotten structural timber members making up the abutment walls and wingwalls subject to approval by the CO. The bridge is approximately 20 feet long and 16 feet wide and spans North Clear Creek and sits on a hairpin turn. PROJECT LOCATION From the town of South Fork, head west on CO-149 N for 18.3 miles, then turn left onto Deep Creek Road for 1.8 miles then continue straight onto County Road 806 for 1.2 miles, then turn left onto CO-149 North for 25.2 miles, then turn left onto Forest Service Road 513 for 1.7 miles, then turn left onto Forest Service Road 513.1A for 1.7 miles. The bridge location is on a hairpin turn below Continental Reservoir. MAGNITUDE OF CONSTRUCTION PROJECT The estimated price range of the project is between $100,000 and $250,000. The method of contractor selection has not been determined at this time. *The value for this project is based on a financial range. The value is listed as the highest possible cost from the range provided by a stakeholder or official project document.

Division 01 -	General Requirements, Vehicular Access and Parking, Traffic Control, Temporary Barriers and Enclosures.
Division 03 -	Concrete, Concrete Reinforcing, Precast Structural Concrete.
Division 05 -	Metals, Structural Steel Framing, Structural Steel for Bridges, Steel Joist Framing, Steel Joist Girder Framing.
Division 07 -	Thermal and Moisture Protection, Expansion Control.
Division 09 -	Finishes, High-Performance Coatings.
Division 10 -	Specialties, Signage, Traffic Signage.
Division 26 -	Electrical, Exterior Lighting, Lighting Poles and Standards, Roadway Lighting.
Division 31 -	Earthwork, Embankments, Erosion and Sedimentation Controls, Slope Protection, Gabions, Riprap, Special Foundations and Load-Bearing Elements, Driven Piles.
Division 32 -	Exterior Improvements, Bases, Ballasts, and Paving, Flexible Paving, Rigid Paving, Fences and Gates, Retaining Walls.
Division 33 -	Utilities, Instrumentation and Control for Utilities, Water Utilities, Water Utility Distribution Piping, Water Utility Distribution Equipment, Disinfecting of Water Utility Distribution, Water Utility Storage Tanks.
Division 34 -	Transportation, Bridges.