Water Treatment Plant Pump Replacement

WTP Pump Replacement Project. The work shall consist of furnishing all labor, materials, tools, equipment, and incidentals required for the completion of the Project. These improvements include, but are not limited to mechanical process and electrical improvements to the existing Water Treatment Plant pumps. The project shall include furnishing all plant, labor, services, equipment, materials, devices, facilities, and appurtenances for the demolition, removal, and disposal of select existing materials, equipment, and facilities, and the installation of new or (as noted) refurbished materials, equipment, and facilities. Replacement activities identified in the contract scope of work indicate the demolition, removal, and disposal of existing, followed by furnishing and installation of new or refurbished. A general description of the work to be performed under this contract shall include, but will not be limited to, the construction operations described below: 1. Proposed improvement work will be performed on the following WTP pumps: a. Raw Water Pump #1 b. Raw Water Pump #2 c. Finished Water Pump #2 .

Division 02 -	Existing Conditions, Subsurface Investigation.
Division 03 -	Concrete, Cast-in-Place Concrete.
Division 22 -	Plumbing, Plumbing Piping, Plumbing Equipment.
Division 26 -	Electrical, Instrumentation and Control for Electrical Systems.
Division 33 -	Utilities, Water Utilities, Water Utility Distribution Piping, Water Utility Distribution Equipment, Water Utility Pumping Stations, Wells.
Division 44 -	Pollution and Waste Control Equipment, Water Pollution Control Equipment.