Fannie Beach Center Roof Project

Furnish and install roof materials, insulation, flashings, and miscellaneous materials on the following designated roof areas: 1. Tear off designated roofing, insulation, flashings, perimeter metal, and obsolete equipment and properly dispose. 2. Bring to the attention of the building owner of all questionable substrate conditions and repair or replace decking as designated by building owner’s representative at a cost in addition to the contracted amount based upon line item quoting on Bid Form. 3. Install insulation, as specified. 4. Install tapered edge and saddles as required to keep water from standing at raised perimeter, upslope from curbs, and between drains and/or scuppers. 5. Install lead drain sumps as specified. 6. Install 60 mil EPDM sheet as specified. 7. Install flashings as specified. 8. Install gutters and downspouts as specified. 9. Install new coping, drip edge, gravel stop, reglet, counter flashing, lead stack flashings, and other metal components as specified. 10. Provide manufacturer’s warranty as specified.

Division 07 -

Thermal and Moisture Protection, Dampproofing and Waterproofing, Thermal Protection.